Hitachi CPX505 User Manual

Hitachi CPX505 - XGA LCD Projector Manual

Get Hitachi CPX505 - XGA LCD Projector PDF manuals and user guides
UPC - 050585151093
View all Hitachi CPX505 manuals
Add to My Manuals
Save this manual to your list of manuals

Hitachi CPX505 manual content summary:

  • Hitachi CPX505 | User Manual - Page 1
    Projector CP-X505/CP-X605 User's Manual - Operating Guide Thank you for purchasing this projector. WARNING ►Before using this product, please read the "User's Manual Safety Guide" and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for future
  • Hitachi CPX505 | User Manual - Page 2
    , Date and time, e-shot, Information, Service Network functions 55 Selecting an aspect ratio 18 Maintenance 56 Adjusting the zoom and focus. . . . . 19 Lamp 56 Adjusting the lens shift 19 Air filter 58 Using the automatic adjustment feature. . 19 Internal clock battery 60 Adjusting
  • Hitachi CPX505 | User Manual - Page 3
    Projector features / Preparations Projector features This projector is used to project various picture signals onto a screen. This projector requires see the "Contents of package" in the "User's Manual (concise)" which is a book. Your projector should come with the items shown there. Contact
  • Hitachi CPX505 | User Manual - Page 4
    Part names Projector (1) Speakers (x 4) (37). (2) Focus ring (19) (3) Zoom ring (19) (4) Lamp cover (56) The lamp unit is inside. (5) Lens shift cover (19) (6) Horizontal lens shift dial (19) (7) Vertical lens shift dial (19) (8) Front cover (9) Lens (61) (10) Lens cover (3) (11) Remote
  • Hitachi CPX505 | User Manual - Page 5
    RGB1 CB/PB RGB2 CR/PR M1-D S-VIDEO R L AUDIO IN 3 R L AUDIO IN 4 AUDIO OUT REMOTE CONTROL (3.5Φ) AC IN I O CONTROL (10) (11) (15) (16) (12) (5) (4) (3) CAUTION ►Do not use the security bar and the security slot to prevent the projector from falling down, since it is not designed
  • Hitachi CPX505 | User Manual - Page 6
    Part names Remote control (7) (1) Laser pointer (13) It is a beam outlet. (4) (2) LASER INDICATOR (13) (3) LASER button (13) (4) STANDBY/ON button (16) (17) (5) VOLUME button (17) (6) MUTE button (17) (26) (7) VIDEO switch (23) : acting 3 functions as below. Cursor button ▲ :
  • Hitachi CPX505 | User Manual - Page 7
    humid or dusty place. Placing the projector in such places could cause fire, electric shock and/or malfunction of the projector. • Do not place the projector near humidifiers, smoking spaces or a kitchen. ►Position the projector to prevent light from directly hitting the projector's remote sensor. 
  • Hitachi CPX505 | User Manual - Page 8
    shift is set full upward (19) On a horizontal surface (b) (a) (c) up (c) down Suspended from the ceiling (c) up (a) (c) down (b) • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. • Consult with your dealer before a special installation such
  • Hitachi CPX505 | User Manual - Page 9
    CONTROL a suitable angle to the screen, projector within 8 degrees. elevating the front side oAfCthINe q This projector locked, put the projector gently. 5. If necessary, the elevator feet can be manually twisted to make more precise adjustments. Hold the projector when twisting the feet
  • Hitachi CPX505 | User Manual - Page 10
    REMOTE CONTROL CONTROL LASER INDICATOR BLANK LASER ASPECT PUSH ENTER Remote control Speakers AUDIO IN Y CB/PB CR/PR COMPONENT VIDEO OUT R L AUDIO IN OUT S-VIDEO OUT R L AUDIO IN OUT VIDEO OUT R L AUDIO IN OUT VCR/DVD player WARNING ►Do not disassemble or modify the projector
  • Hitachi CPX505 | User Manual - Page 11
    PC to CRT display or to simultaneous LCD and CRT display.) For details on how this is done, please refer to the instruction manual of the corresponding laptop PC. • When the picture resolution is changed on a computer depending on an input, automatic adjustment function may take some time and may
  • Hitachi CPX505 | User Manual - Page 12
    Connect the connector of the power cord to the AC inlet of the projector. 2. Firmly plug the power cord's plug into the outlet. AC in fire and/or electrical shock. • Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one. • Only plug
  • Hitachi CPX505 | User Manual - Page 13
    vision problems. CAUTION ►Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Putting batteries Please load the batteries before using the remote control. If the remote control starts to malfunction, replace the
  • Hitachi CPX505 | User Manual - Page 14
    frequency of its signal. If the remote control does not function properly, attempt to change the signal frequency. Please remember that the "REMOTE FREQ." in SERVICE item of OPTION menu (46) of the projector to be controlled should be set to the same mode as the remote control. To set the mode of
  • Hitachi CPX505 | User Manual - Page 15
    RGB1 CB/PB port on the back of the projector via an audio cable with 3.5 diameter stereo mini plugs. S-VIDEO R L AUDIO IN 3 R L AUDIO IN 4 When the remote control signal is hard to reach surely to the projector in the environment, this function is effective. RGB2 CR/PR AUDIO OUT I O M1
  • Hitachi CPX505 | User Manual - Page 16
    VIDEO RGB BLANK LASER The power indicator will light up in steady orange (63). Then wait several seconds because the buttons may not function Press the STANDBY/ON button on the projector or the remote control again while the message appears. The projector lamp will go off, and the POWER
  • Hitachi CPX505 | User Manual - Page 17
    an input signal 1. Press the INPUT button on the projector. Each time you press the button, the projector switches its input port as below. RGB 1  RGB 2  M1-D VIDEO S-VIDEO COMPONENT (Y, CB/RB, CR/BR)   1. Press the RGB button on the remote control to select an input port for the RGB signal
  • Hitachi CPX505 | User Manual - Page 18
    input signal (continued) 1. Press the VIDEO button on the remote control to select an input for video signal. Each time you press the button, the projector switches its video input port as below. COMPONENT (Y, CB/RB, CR/BR)  S-VIDEO  VIDEO LASER INDICATOR STANDBY/ON VIDEO BLANK RGB LASER BLANK
  • Hitachi CPX505 | User Manual - Page 19
    Zoom ring Operating Focus ring Top UP Lens shift LASER INDICATOR cover DOWN STANDBY/ON VIDEO RGB LEFT BLANK RIGHT LASER Using the automatic adjustment feature 1. Press the AUTO button on the remote control. ASPECT PUSH ENTER PAGE UP PAGE DOWN  For an RGB signal ESC MENU RESET The
  • Hitachi CPX505 | User Manual - Page 20
    ● When this function is performed on a video signal, s-video signal or component video signal, some remote control. A dialog will appear on the -';5610' #761':'%76' screen to aid you in correcting the distortion. /#07#.   2. Use the cursor buttons ▲/▼ to select AUTO or MANUAL
  • Hitachi CPX505 | User Manual - Page 21
    when one of the projector's buttons or the remote control buttons of STANDBY/ON, SEARCH, RGB, VIDEO, BLANK, AUTO, ASPECT, VOLUME, MUTE, KEYSTONE, POSITION, MENU, MAGNIFY and MY BUTTON is pressed. ● If the projector continues projecting a still image for a long time, the LCD panel might possibly be
  • Hitachi CPX505 | User Manual - Page 22
    wheAnSPECoT ne of the projector's buttons or the remote control buttons is pressed or one PUSHENTER of the commands (except get commands) is transmitted to the control port. PAGE UP PAGE DOWN ESC MENU RESET NOTE • The sound is not connected with the blank screen function. If necessary, set
  • Hitachi CPX505 | User Manual - Page 23
    on the projector or remote control, or the ESC button on the remote control. 5. Press the MENU button on the remote control again to close the menu and complete this operation. Even if you do not do anything, the dialog will automatically disappear after about 10 seconds. ● Some functions cannot be
  • Hitachi CPX505 | User Manual - Page 24
    performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control. Then perform it according to the following table. '#5;/'07=4)$? # IMAGE menu (29). Using the ► button executes the auto keystone function. See the AUTO KEYSTONE EXECUTE item in SETUP menu (35). Using
  • Hitachi CPX505 | User Manual - Page 25
    SHARPNESS WHISPER MIRROR RESET FILTER TIME LANGUAGE Go to all of the EASY MENU items except the FILTER TIME and LANGUAGE. A dialog is displayed for item resets the filter time which counts usage time of the air filter. A dialog ▲ button performs resetting. See the FILTER TIME item in OPTION menu (43
  • Hitachi CPX505 | User Manual - Page 26
    projector or remote control, and press the ► cursor button #7&+1 5%4''0 %1.14 6+06 on the projector or remote control, or the ENTER button displays a dialog to aid you in adjusting the mode. This function is useful when you want to change the brightness of particular tones. ENTER : 1
  • Hitachi CPX505 | User Manual - Page 27
    scale of 9 steps Ramp  Gray scale of 15 steps • When this function is performed, lines or other distortion may appear. COLOR Using the ▲/▼ buttons adjusts Weak • This item can be selected only for a video signal, s-video or component video signal. TINT Using the ▲/▼ buttons adjusts the tint.
  • Hitachi CPX505 | User Manual - Page 28
    the active iris control mode. PRESENTATION ó THEATER ó TURN OFF ACTIVE IRIS MY MEMORY PRESENTATION THEATER TURN OFF Feature The active occurs select TURN OFF. This projector has 4 memories for adjustment data (for all the items of the PICTURE menu). Selecting a function using the ▲/▼ buttons and
  • Hitachi CPX505 | User Manual - Page 29
    on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute to the default setting. • When this function is performed on a video signal, s-video signal, or component video signal of 525i (480i) or 625i (576i
  • Hitachi CPX505 | User Manual - Page 30
    the remote control during this operation. Selecting this item performs the automatic adjustment feature. For VIDEO FORMAT item in INPUT menu. For a component video signal, the signal type is identified automatically independently of this function. For a Video signal, S-video signal or Component video
  • Hitachi CPX505 | User Manual - Page 31
    on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to switches the 3D-YCS mode. STILL ó MOVIE ó TURN OFF • This function performs only at a VIDEO input of NTSC, and PAL. • MOVIE is the mode for images with
  • Hitachi CPX505 | User Manual - Page 32
    VIDEO ports will function as a SCART RGB port. ALAN SCART adapter or SCART cable is required for a SCART RGB input to the projector. For details, contact your dealer. RGB OUT RGB1 RGB2 M1-D AUDIO IN 1 AUDIO IN 2 VIDEO Y CB/PB CR/PR REMOTE S-VIDEO R L R AUDIO L OUT CONTROL Feature
  • Hitachi CPX505 | User Manual - Page 33
    on an RGB signal with a vertical frequency of 50 to 60 Hz. • When the TURN ON is selected, a moving pictures are displayed more smoothly. • This function may cause a certain degradation of the picture. In such a case, please select the TURN OFF. Set the RGB input signal type for the RGB port
  • Hitachi CPX505 | User Manual - Page 34
    RGB2 input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed. 4'51.76+10 (2) In the RESOLUTION menu select the resolution you wish to display using the ▲/▼ buttons. Selecting
  • Hitachi CPX505 | User Manual - Page 35
    on the projector or remote control, and press the ► cursor button on the projector or remote control, or the ENTER button on the remote control to execute of the image • The adjustable range of this function will vary among inputs. For some input, this function may not work well. • When the vertical
  • Hitachi CPX505 | User Manual - Page 36
    . MIRROR NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT If the Transition Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm (51) will be displayed when projector is restarted after the power switch is turned off. 36
  • Hitachi CPX505 | User Manual - Page 37
    buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute of the drivers. Adjust it depending on the user's preference. Using the ▲/▼ buttons turns the speaker function on/off. TURN ON ó TURN OFF •
  • Hitachi CPX505 | User Manual - Page 38
    in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table. /'07
  • Hitachi CPX505 | User Manual - Page 39
    up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF START UP MyScreen ORIGINAL TURN OFF Feature Screen can be registered by the MyScreen item (40). Screen preset as the standard screen. Plain black screen. • To avoid remaining as an
  • Hitachi CPX505 | User Manual - Page 40
    appear. To stop performing, press the RESET or ESC button on the remote control. 2. Using the buttons adjusts the frame position. Please move the signal. • This function cannot be selected when the TURN ON is selected to the MyScreen Lock item (below). • This function cannot be selected
  • Hitachi CPX505 | User Manual - Page 41
    turns on/off the message function. TURN ON ó TURN OFF When the TURN ON is selected, the following message function works. "AUTO IN PROGRESS . Do not mistake freezing for a malfunction (21). Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN
  • Hitachi CPX505 | User Manual - Page 42
    an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following table
  • Hitachi CPX505 | User Manual - Page 43
    about the lamp. • For the lamp replacement, see the section "Lamp" (56, 57). The filter time is the time counted after the last resetting. It is shown in the OPTION menu as the usage time of the air filter. Pressing the RESET button on the remote control or the ► button of the projector displays
  • Hitachi CPX505 | User Manual - Page 44
    buttons, and press the ► button or the ENTER button on the remote control to execute the item. FAN SPEED  AUTO ADJUST  GHOST  FILTER MESSAGE  LENS TYPE  KEY LOCK SERVICE FACTORY RESET  INFORMATION  REMOTE FREQ.  REMOTE RECEIV. FAN SPEED Using the ▲/▼ buttons switches the rotation speed of
  • Hitachi CPX505 | User Manual - Page 45
    the automatic adjustment feature is disabled, cable to the projector, environment around the projector, etc., the manually. GHOST 1. Select a color element of ghost using the ◄/► buttons. 2. Adjust the selected element using the ▲/▼ buttons to disappear ghost. 4)$    )*156 SERVICE FILTER
  • Hitachi CPX505 | User Manual - Page 46
    key lock feature. When TURN ON is selected, the buttons on the projector except the STANDBY/ON button are locked. TURN ON ó TURN OFF • Please use to avoid a mischief and touching accidentally. This function does not have any effect on the remote control. REMOTE RECEIV. (1) Select a remote sensor
  • Hitachi CPX505 | User Manual - Page 47
    projector is equipped with security functions. User registration is required before using the security functions. Please contact your local dealer. 1. Using Security Features time. Pressing the ENTER button on the remote controll or INPUT button on the projector will close the NOTE NEW PASSWORD BOX.
  • Hitachi CPX505 | User Manual - Page 48
    on the remote control for about 3 seconds or press and hold the INPUT and ► buttons on the projector for about user registration information is confirmed. SECURITY 2. Using the MyScreen PASSWORD Function The MyScreen PASSWORD function can be used to prohibit access to the MyScreen function
  • Hitachi CPX505 | User Manual - Page 49
    time. Pressing the ENTER button on the remote control or INPUT button on the projector will return to  '06'4 ':+6 PASSWORD BOX MyScreen PASS WORD on/off menu. When a PASSWORD is set for MyScreen: • The MyScreen registration function (and menu) will be unavailable. • The MyScreen
  • Hitachi CPX505 | User Manual - Page 50
    part projector is restarted after The projector can be projector will also turn off if there is no key input for about 5 minutes while the PIN BOX is displayed. This function will activate only when the projector to turn the PIN LOCK function off. If an incorrect is displayed the projector will turn off.
  • Hitachi CPX505 | User Manual - Page 51
    will be recorded. NOTE: This feature may not function properly if the projector is not in a stable position minutes the lamp will turn off. This function will activate only when the projector is the ENTER button on the remote control or the INPUT button on the projector will return to the CHECK
  • Hitachi CPX505 | User Manual - Page 52
    Code will be displayed inside the BOX. 4.4-3 Contact your dealer with the 10 digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. 64#05+6+10&'6'%614 '06'42#55914& +PSWKTKPI%QFG  37+6 0':6 ENTER PASSWORD BOX (large) 52
  • Hitachi CPX505 | User Manual - Page 53
    remote control to execute the item. Then perform it according to the following table. NOTE • The factory default setting for DHCP is "TURN ON". There is no need to set up [DHCP], [IP ADDRESS], [SUBNET MASK] or [DEFAULT GATEWAY] if your network has DHCP enabled. ( User's Manual - Network Functions
  • Hitachi CPX505 | User Manual - Page 54
    / Time Settings] in [User's Manual - Network Functions: Configuring and Controlling the Projector via a Web Browser] remote control or the INPUT button on the projector. If you do not wish to delete the image use the ESC button on the remote control or push the ◄ and INPUT buttons on the projector
  • Hitachi CPX505 | User Manual - Page 55
    Then use the ▲ button to execute. SERVICE 4'56#46 ':'%76' %#0%'. Network will be once cut off when choose restart. If DHCP is selected on, IP address may be changed. After selecting RESTART, Network menu may not be controlled approx. 20 seconds. Network functions Refer to the separate volume on
  • Hitachi CPX505 | User Manual - Page 56
    Replacing the lamp The lamp cover 1. Turn the projector off, and unplug the power cord. Allow the projector to cool for at least 45 minutes. 2. Prepare a new lamp. If the projector is mounted on a ceiling, or if the lamp has broken, also ask the dealer to replace the lamp. In case of replacement
  • Hitachi CPX505 | User Manual - Page 57
    • Do not open the lamp cover while the projector is suspended from the ceiling. This is dangerous, since if the lamp's bulb has broken, the shards will fall out when the cover is opened. In addition, working in high places is dangerous, so ask your local dealer to have the lamp replaced even if the
  • Hitachi CPX505 | User Manual - Page 58
    Replace the air filter with new one. It is recommended that the fluted surface of the air filter faces the filter cover. 7. Put the filter frame back. 8. Put the filter unit back into the projector. The front side of the projector The filter cover The filter cover knobs The filter unit The filter
  • Hitachi CPX505 | User Manual - Page 59
    when it is damaged or too soiled, and also when you replace the lamp. • When you replace the projection lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. • Please reset the filter time only when you have cleaned or
  • Hitachi CPX505 | User Manual - Page 60
    a new battery in. Replace battery with HITACHI MAXELL, Part No.CR2032 only. Use projector over again, so that the top of the projector is facing up. 3. While lifting the side of the projector replacing the battery. (Please refer to 55 and User's Manual-Network Functions: Date/Time Settings for
  • Hitachi CPX505 | User Manual - Page 61
    not touch the lens directly with your hand. Caring for the cabinet and remote control Incorrect care could have adverse influence such as discoloration, peeling paint, etc. 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. 2. After making sure that the
  • Hitachi CPX505 | User Manual - Page 62
    the SERVICE item in the OPTION menu to HIGH. REMINDER A note of precaution when cleaning the air filter. *** HRS PASSED AFTER THE Please immediately turn the power off, and clean or change LAST FILTER CHECK. the air filter referring to the "Air Filter" section of this manual FILTER MAINTENANCE
  • Hitachi CPX505 | User Manual - Page 63
    the instructions within the table. If the same indication is displayed after the remedy, or if an indication other than the following is displayed, please contact your dealer or service company. POWER LAMP TEMP indicator indicator indicator Description Lighting Turned Turned The projector is
  • Hitachi CPX505 | User Manual - Page 64
    filter dirty? • Does the peripheral temperature exceed 35°C? If the same indication is displayed after the remedy, please set FAN SPEED of the SERVICE Power ON" schedule is saved to the projector. (Please refer to the User's Manual-Network Functions: Schedule Settings for more information.) NOTE
  • Hitachi CPX505 | User Manual - Page 65
    again, wait at least 10 minutes to make the projector cool down enough. 3. Some setting may be wrong. Please use the FACTORY RESET function of the SERVICE item in the OPTION menu (46) to reset all settings to factory default. Then, if the problem is not removed after the remedy, please contact your
  • Hitachi CPX505 | User Manual - Page 66
    cannot detect the projector as a plug and play monitor. Make sure that the computer can detect a plug and play monitor using another plug and play monitor. 24, 26 11 The BLANK screen is displayed. Press the BLANK button on the remote control. 22 Video screen The FREEZE function is working
  • Hitachi CPX505 | User Manual - Page 67
    and/or CONTRAST settings to a higher level using the menu function. The WHISPER function is working. Select NORMAL for the WHISPER item in the SETUP menu. The lamp is approaching the end of its product lifetime. Replace the lamp. Either the focus and/or horizontal phase settings are not properly
  • Hitachi CPX505 | User Manual - Page 68
    , CR/PR........... RCA x3 S-VIDEO S-video x1 VIDEO Video x1 Audio input port AUDIO IN1........Stereo mini x1 AUDIO IN2........Stereo mini x1 AUDIO IN3 RCA x2 AUDIO IN4 RCA x2 Communication port CONTROL.......... D-sub 9pin x1 Other ports NETWORK RJ45 x1 REMOTE CONTROL Stereo mini x1 DT00771
  • Hitachi CPX505 | User Manual - Page 69
    Specifications (continued) Specifications 319 154 139 418 [unit: mm] 69
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
±
Projector
CP-X
5
05/CP-X
6
05
User's Manual – Operating Guide
Thank you for purchasing this projector.
WARNING
►
Before using this product, please read the "User's Manual -
Safety Guide" and related manuals to ensure the proper use of this product.
After reading them, store them in a safe place for future reference.
About this manual
Various symbols are used in this manual. The meanings of these symbols are
described below.
WARNING
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
CAUTION
This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.
NOTE
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual.
• The reproduction, transfer or copy of all or any part of this document is not permitted
without express written consent.
Trademark acknowledgment
• Mac is registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
•
is a trademark of SRS Labs, Inc.
• WOW technology is incorporated under license from SRS Labs, Inc.
All other trademarks are the properties of their respective owners.