Hitachi DS18DFLPC Instruction Manual - Page 17

The Scope And Suggestions For Uses - torque

Get Hitachi DS18DFLPC - 18 Volt 1.5Ah Lithium Ion Compact Driver Drill PDF manuals and user guides
UPC - 717709013261
View all Hitachi DS18DFLPC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

English THE SCOPE AND SUGGESTIONS FOR USES Table 5 Work Wood Drilling Steel Aluminum Screw tightening Machine screw Wood screw Clutch dial position 1 - 22 1 - Suggestions Use for drilling purpose. Use the bit and socket matching the screw diameter. Use after drilling a pilot hole. HOW TO SELECT TIGHTENING TORQUE Table 6 Clutch dial position Tightening torque 1 Approximately 9 in-lbs. (10 kg-cm) 3 Approximately 15 in-lbs. (17 kg-cm) 7 Approximately 23 in-lbs. (26 kg-cm) 13 Approximately 35 in-lbs. (40 kg-cm) 17 Approximately 43 in-lbs. (49 kg-cm) 22 Approximately 52 in-lbs. (60 kg-cm) High speed: approximately 71 in-lbs. (82 kg-cm) (DS14DFL) approximately 97 in-lbs. (112 kg-cm) (DS18DFL) Low speed: approximately 274 in-lbs. (347 kg-cm) (DS14DFL) approximately 374 in-lbs. (459 kg-cm) (DS18DFL) Operation example Machine screw tightening Screw tightening for soft wood material Screw tightening for hard wood material Thick screw tightening When used as a drill. NOTE: The selected content shown in Table 4 indicates the differences according to screw type, screw size and material used. ● CAUTION: While operating the Cordless driver drill, take care not to lock the motor. If the motor is locked, immediately turn the power off. If the motor is locked for a while, the motor or battery will be burnt. ● Do not tighten too strongly as the screw heads will be damaged. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
English
17
THE SCOPE AND SUGGESTIONS FOR USES
Table 5
HOW TO SELECT TIGHTENING TORQUE
Table 6
Work
Clutch dial position
Suggestions
Wood
Drilling
Steel
Use for drilling purpose.
Aluminum
Machine
1 – 22
Use the bit and socket matching the
Screw
screw
screw diameter.
tightening
Wood
1 –
Use after drilling a pilot hole.
screw
Clutch dial
Tightening torque
Operation example
position
Approximately 9 in-lbs. (10 kg-cm)
Approximately 15 in-lbs. (17 kg-cm)
Approximately 23 in-lbs. (26 kg-cm)
Approximately 35 in-lbs. (40 kg-cm)
Approximately 43 in-lbs. (49 kg-cm)
Approximately 52 in-lbs. (60 kg-cm)
High speed: approximately 71 in-lbs.
(82 kg-cm) (DS14DFL)
approximately 97 in-lbs.
(112 kg-cm) (DS18DFL)
Low speed:
approximately 274 in-lbs.
(347 kg-cm) (DS14DFL)
approximately 374 in-lbs.
(459 kg-cm) (DS18DFL)
Machine screw
tightening Screw
tightening for soft wood
material
Screw tightening for
hard wood material
Thick screw tightening
When used as a drill.
1
3
7
13
17
22
NOTE:
The selected content shown in Table 4 indicates
the differences according to screw type, screw size
and material used.
CAUTION:
●
While operating the Cordless driver drill, take care
not to lock the motor.
If the motor is locked, immediately turn the power
off.
If the motor is locked for a while, the motor or
battery will be burnt.
●
Do not tighten too strongly as the screw heads
will be damaged.