Hitachi DV-PF73U Owners Guide - Page 23
Playing A Disc
View all Hitachi DV-PF73U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
H9451UD(EN).qx33 03.1.22 7:22 PM Page 23 English AUTO REWIND REAL TIME TAPE COUNTER When a tape reaches the end during recording, playback, or fast-forward, the tape will automatically rewind to the beginning. After rewinding finishes, the DVD/VCR will eject the tape and switch itself off. ¡The DVD/VCR will not rewind the tape automatically during timer recording or Instant Recording Timer. ¡This shows the elapsed recording or playback time in hours, minutes, and seconds. (The displayed time will not change during blank portions of the tape. The front display of DVD/VCR will show in hour, minute only.) ¡The indication will appear when the tape is rewound further than "0:00:00" on the tape counter. PLAYING A DISC BASIC PLAYBACK DVD CD Getting started ¡Turn on the power of the TV, amplifier and any other components which are connected to the DVD/VCR. ¡Make sure the TV and audio receiver (commercially available) are set to the correct channel. ¡Select DVD mode by pressing DVD on the remote control or output on the front panel. 1 Press y/I. ¡"Load" will appear briefly on the display panel. ¡Check that the DVD OUTPUT Light is lit. If not, press the DVD button on the Remote control to switch to DVD mode. ¡During the playback of a two layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a malfunction. ¡If a disc is dirty or has scratches, the pictures may appear distorted and the playback operation may stop. In such cases, clean the disc and unplug the power cord and then plug it again before resuming playback. GENERAL FEATURES DVD may contain menus to navigate the disc and access special features. Press appropriate numerical button or use Arrow (L/K/B/s) to highlight your selection in the DVD main menu and press ENTER to confirm. Note ¡Unless stated, all operations described are based on remote control use. Some operations can be carried out using the menu bar on the TV screen. DISC NAVIGATION 2 Press OPEN/CLOSE to open disc loading tray. 3 Place the chosen disc in the tray, with the label facing up. DVD 1 Press DISC NAVIGATION. DURING TITLE PLAYBACK OR WHEN RESUME IS ON: ¡The first scene of each chapter of the title being played will be displayed. IN STOP MODE (RESUME OFF): ¡The first scene of each chapter of the first title will be displayed. 4 Press PLAY. ¡The tray will close automatically, and playback will then start from the first chapter or track of the disc. If the playback does not start automatically, press PLAY. ¡When you playback the DVD which a title menu is recorded, it may appear on the screen. In this case, refer to "TITLE MENU" on page 24. 2 Press Arrow (K/L/s/B) to select your desired chapter. ¡Up to 6 chapters can be displayed at one time. If the title has more than 6 chapters, press SKIP G to go to the next page. Press SKIP H to go back to the previous page. ¡You can change the title by moving up to the field where the title number is shown with Arrow (K), and entering a title number of your choice. 3 Press ENTER or PLAY. ¡Playback of the selected chapter will start. 5 Press STOP to stop playback. Notes Notes ¡A "prohibited icon" may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD/VCR or the disc. ¡Pressing DISC NAVIGATION before pressing ENTER or PLAY at step 3 will cease the DISC NAVIGATION function, and the playback will be stopped. The resume information will be lost. ¡When a disc menu is shown, the DISC NAVIGATION feature does not function. ¡With DVDs that use titles for playback program sig- ¡DISC NAVIGATION takes a few seconds to respond. nals, playback may start from the second title, or it ¡With some discs, part of the DISC NAVIGATION screen may skip these titles. may not be displayed properly. This is not a malfunction. - 23 - EN 1L25