Hitachi P50S601 Owners Guide - Page 12

First time use Front Panel Controls ቪ POWER light indicator To turn the TV ON, press the main power switch located on the lower right side of the TV. A red stand-by indicator lamp located on the lower right corner of the front bezel will illuminate. The Plasma TV is now ready for remote ON/OFF operation. ቪ Indicating Lamp ቫ R/C sensor Indicating Lamp Power Status Operating Off OFF. When the main power switch is set to Off. Lights Red Lights Blue Lights Orange Blinking Blue OFF. (Stand-by) When the main power switch on the TV is ON. On TV MAIN POWER is ON ; picture is shown. Off TV MAIN POWER is ON with no signal input (Power Saving) except antenna (no sync. signal). On When TV receives the IR signal from R/C. ቫ REMOTE CONTROL sensor Point your remote at this area when selecting channels, adjusting volume, etc. ቭ INPUT- FRONT JACKS INPUT- FRONT provide composite Video jacks for connecting equipment with this capability, such as a DVD player or Camcorders. NOTES: 1. Your HITACHI Plasma TV will appear to be turned OFF (lights orange) if there is no video input when INPUT : 1, 2, 3, Front and HDMI 1, 2 , Front. Check the Power Light to make sure the TV is turned off or in Stand-by mode (lights red) when not in use. 2. Remote Control can not turn ON/OFF the "MAIN POWER" of the TV. 12