Hitachi SV13YA Instruction Manual - Page 10
Assembly And Operation
UPC - 717709009295
View all Hitachi SV13YA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
English ASSEMBLY AND OPERATION APPLICATIONS ⅜ Roughing or finishing of woodwork and metal surfaces. ⅜ Preliminary sanding of woodwork and metal surfaces before painting. ⅜ Paint removal. ⅜ Rust removal. PRIOR TO OPERATION 1. Power source Ensure that the power source to be utilized conforms to the power source requirements specified on the product nameplate. 2. Power switch Ensure that the switch is in the OFF position. If the plug is connected to a receptacle while the switch is in the ON position, the power tool will start operating immediately and can cause serious injury. 3. Extension cord When the work area is far away from the power source, use an extension cord of sufficient thickness and rated capacity. The extension cord should be kept as short as practicable. WARNING: Damaged cord must be replaced or repaired. 4. Check the receptacle If the receptacle only loosely accepts the plug, the receptacle must be repaired. Contact a licensed electrician to make appropriate repairs. If such a fautly receptacle is used, it may cause overheating, resulting in a serious hazard. 5. Check your working environment Ensure the following before operation; ⅜ No flammable gas, liquid, or object at worksite. ⅜ Sanding thin steel sheet may cause a high booming sound. In this case, place a rubber mat under the workpiece. ⅜ Take appropriate noise preventive measures to prevent adverse affects on the environment by electrical noise. ⅜ Clear the area of children or unauthorized personnel. 10