HoMedics AR-45 Downloadable Instruction Book - Page 4

NOTE: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of shock, this plug is intended to fit only one way in a polarized outlet. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature. To do so could result in an electric shock hazard. Control Panel Clean Filter Reset UV-C Bulb Reset Timer Fan Speed Oscillation On/Off Power On/Off UV-C Bulb On/Off 6 Operating Instructions Turning the Unit On • Take the air cleaner out of the box and remove the clear protective plastic bag. • Place the air cleaner on a firm level surface. • Before turning the air cleaner ON, you need to confirm that the filters are firmly in place and did not become loose during shipping. 1. To check filters, open the rear grill by gently pushing down on the release tab on the top of the rear grill. Fig. 1 Fig. 1 2. Open the plate outward until the tabs at the bottom of the grill plate easily slide away from the unit. Fig. 2 Fig. 2 3. The HEPA filters will be resting inside the unit. Make sure that the filters are firmly seated inside of the unit. Fig. 3 4. Place the tabs at the bottom of the Fig. 3 grill plate into the base of the unit. Gently push the grill plate back into place until you hear a click sound indicating that the grill is firmly latched. Fig. 4 Connect the power cord into a standard AC outlet. Fig. 4 NOTE: Unit will not operate unless filters and grill are properly installed. 7