Homelite UT41112 User Manual - Page 12

Operation, Maintenance - string trimmer a

Page 12 highlights

OPERATION ROTATING rear HANDLE See Figure 9.  Unplug the string trimmer.  Pull up edging coupler and turn handle end counterclockwise.  Release edging boom coupler when handle has been rotated 180°. edging See Figures 9 - 11. The rotating handle can be used in combination with the edger guide for edging sidewalks and walkways. To use the edger guide, flip down from it's stored position. REAR HANDLE edger guide Fig. 10 2 2 2 2 Pull Up Edging coupler to rotate 180° 1 Fig. 9 Fig. 11 MAINTENANCE WARNING: 180° When se1rvicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during product operation. If operation is dusty, also wear a dust mask. WARNING: Before inspecting, cleaning, or servicing the machine, shut off motor, wait for all moving parts to stop, and disconnect extension cord. Failure to follow these instructions can result in serious personal injury or property damage. Page 12 - English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

Page 1±
— English
2
180°
2
1
OPERATION
Fig. 10
WARNING:
When servicing, use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
WARNING:
Always wear safety goggles or safety glasses with side
shields during product operation. If operation is dusty,
also wear a dust mask.
ROTATING REAR HANDLE
See Figure ¸.
Unplug the string trimmer.
Pull up edging coupler and turn handle end
counterclockwise.
Release edging boom coupler when handle has been
rotated 180°.
EDGING
See Figures ¸ - 11.
The rotating handle can be used in combination with the
edger guide for edging sidewalks and walkways. To use the
edger guide, flip down from it’s stored position.
PULL UP
EDGING COUPLER
TO ROTATE
EDGER GUIDE
Fig. 9
WARNING:
Before inspecting, cleaning, or servicing the machine,
shut off motor, wait for all moving parts to stop, and
disconnect extension cord. Failure to follow these
instructions can result in serious personal injury or prop-
erty damage.
REAR
HANDLE
Fig. 11
MAINTENANCE