Homelite UT42120 User Manual - Page 12
Warning, Operation - vacuum bag for blower vac
View all Homelite UT42120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
OPERATION VACUUM OPERATION See Figure 8. WARNING: Never run the unit without the vacuum tubes and vacuum bag installed. Use of an improperly assembled unit could result in serious personal injury. n Install the vacuum tubes and bag. Refer to the Assembly section earlier in this manual. n Place the vacuum bag strap over your shoulder and hold the handle knobs in your hands. (Proper operating position is shown in fig. 8.) n Start the blower/vac. Refer to Starting and Stopping earlier in this manual. n Move the unit from side to side along outer edge of the debris. To avoid clogging, do not place the vacuum tube directly into the debris pile. n Hold the motor higher than the inlet end of the vacuum tube. n Always point vacuum tube downhill when working on a hillside. n To avoid injury to the operator or unit, do not pick up rocks, broken glass, bottles, any type of metal objects, or other similar objects. n If the vacuum tubes should clog, stop the motor, unplug the power cord, and wait for all moving parts to stop before cleaning out the obstruction. Remove the vacuum tubes and clear the debris from the blower fan housing. Remove the bag and clear the tube. A small rod or stick may be required to clear the entire tube length. Ensure that all debris has been cleared before reassembling the vacuum tubes. Page 10 - English