Honeywell C7089U1006 Owner's Manual - Page 1

C7089 Outdoor Sensor (USE WITH TH8000 AND TH7000 THERMOSTATS) APPLICATION This C7089 Outdoor Sensor is used with theTH8000 and TH7000 Thermostat families. SPECIFICATIONS Operating Ambient Temperature Range: -40 to 120°F (-40 to 49°C). Display Range: -40 to 127°F (-40 to 53°C). Sensor Accuracy: +/-1.5°F at 70°F (+/-.84 at 21°C) Operating Relative Humidity: 5% to 95% non-condensing. Dimensions in in. (mm): 2-1/4 (57) x 3/8 (10) with 60 (1524) leadwires. INSTALLATION INSTRUCTIONS Location and Mounting (Fig. 1) Mount the sensor where: • cannot tamper with settings. • there is good air circulation. • it can measure true outdoor ambient temperature. • surface is flat. • wire distance between C7089 and thermostat is less than 200 feet. Do not mount the sensor: • in direct sunlight. • where hot or cold air blows on the sensor. Discharge line from an outdoor compressor unit, vent or fan causes inaccurate temperature readings. • where snow, ice or debris can cover it. Use the following steps to mount the sensor: 1. Remove the sensor from the mounting clip. 2. Mark the area on the location selected for mounting the sensor mounting clip. 3. Mount the clip. INSTALLATION When Installing this Product... 1. Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous condition. 2. Check the ratings given in the instructions and on the product to make sure the product is suitable for your application. 3. Installer must be a trained, experienced service technician. 4. After installation is complete, check out product operation as provided in these instructions. CAUTION Electrical Shock Hazard. Can cause electrical shock or equipment damage. Disconnect power supply before connecting wiring. M7514 Fig. 1. Typical locations for outdoor sensor. ® U.S. Registered Trademark Copyright © 2004 Honeywell International Inc. • • All Rights Reserved 69-1709EFS