Honeywell CT2800 Owner's Manual - Page 17

Step 4. Program Cooling Schedule a. Write in the times and temperatures you want to program for your cooling schedule. Cooling Schedule Program Period Suggested Settings Time Temp WAKE 6:00 AM 78°F (25.5°C) LEAVE 8:00 AM 85°F (29.5°C) RETURN 6:00 PM 78°F (25.5°C) Weekday (Mon-Fri) Time Temp Weekend (Sat-Sun) Time Temp b. Set the System switch to COOL. c. Repeat steps 3c. through 3k. to program the weekday and weekend cooling schedule. Step 5. Check System SLEEP 10:00 PM 82°F (28°C) Verify that your heating system works a. Set the System switch to Heat, and the Fan switch to Auto. Fig. 25. b. Press Temp until the setting is 10°F (6°C) above room temperature (Fig. 25). Your heating system should start and the fan should run after a short delay. c. Press Temp until the setting is 10°F (6°C) below room temperature. Your heating system should shut off. Verify that your cooling system works IMPORTANT: To avoid damaging the compressor in the air conditioner, do not operate the cooling system when the temperature outdoors is below 50°F (10°C). 17 69-1638-1