Honeywell CT30 Owner's Manual - Page 2
Remove your old thermostat, Did you purchase right thermostat? Count wires to check. - thermostat manual
View all Honeywell CT30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Owner's Manual Remove your old thermostat 1 Turn off power at heating/cooling system (or fuse/circuit-breaker panel). 2 Remove cover and thermostat, but leave wallplate with wires attached. Leave wallplate in place Is there a sealed tube containing mercury? If so, see mercury notice below. Old thermostat Cover MERCURY NOTICE: Do not place your old thermostat in the trash if it contains mercury in a sealed tube. Contact your local waste management authority for instructions regarding recycling and proper disposal. Did you purchase right thermostat? Count wires to check. Count the number of wires coming out of the wall and attached to terminals in your old thermostat. If any of them are attached to a terminal marked "C" or "C1" do not count that wire in your total. If the total (not counting C or C1) is 2 wires, proceed to the next page. If you have 3 or more wires, your new thermostat may not be compatible with your system. Stop installation and call 1-800-468-1502 for advice. Do you have 3 or more wires? If so, stop now. You may have purchased the wrong replacement thermostat. 2