Honeywell CT3550 Owner's Manual - Page 15

❑ Press or until the desired wake temperature displays. The setpoint temperature range is 40°F to 90°F (4.5°C to 32°C) for heating and 45°F to 99°F (7°C to 37°C) for cooling. ❑ Press Heat/Cool Settings to switch between setpoints. NOTE: Program times are the same for heating and cooling. ❑ Press or until the display shows the desired temperature setpoint. ❑ Press Fan until the fan is at the desired setting (On or Auto). NOTE: Setting Fan to On runs the system fan continuously in the program periods. ❑ Press , Leave Return or Sleep and repeat these steps for each time period. Your weekday is now programmed. Program Saturday and Sunday ❑ Repeat each step in Program Weekdays for Saturday and Sunday. ❑ Press Run Program when the entire week is programmed. Clear a Program Period NOTE: Wake cannot be cleared. ❑ Press , Leave Return , or Sleep for the program period you want to clear. ❑ Press Day until the desired day displays (Mon-Fri Sat; Sun). ❑ Press and hold the , Leave Return , or Sleep for approximately 3 seconds until the time and temperature clear. ❑ Repeat the above steps for each period to be cleared. ❑ Press Run . Program 15 69-1284-2