Honeywell HJC4000 User Guide

Honeywell HJC4000 Manual

Get Honeywell HJC4000 PDF manuals and user guides View all Honeywell HJC4000 manuals
Add to My Manuals
Save this manual to your list of manuals

Honeywell HJC4000 manual content summary:

  • Honeywell HJC4000 | User Guide - Page 1
    UltraKey Touch DVR and PTZ Keyboard Controller HJC4000 Installation and User Guide Document 800-06554 - Rev C - 02/11
  • Honeywell HJC4000 | User Guide - Page 2
  • Honeywell HJC4000 | User Guide - Page 3
    Installation and User Guide
  • Honeywell HJC4000 | User Guide - Page 4
    /10 08/10 02/11 Revisions New document. Document revised for preproduction release. Document updated for latest software changes. Changes include additions to the PTZ keyboard operations section for Diamond and Intellibus protocols. This is the production release version of this document. 4
  • Honeywell HJC4000 | User Guide - Page 5
    UltraKey Touch Installation and User Guide Contents About this Document 11 Overview of the Contents 11 Explanation of Symbols 11 Cautions and Warnings 12 FCC Compliance Statement 13 Manufacturer's Declaration of Conformance 13 North America 13 Europe 14 Important Safety Instructions 14
  • Honeywell HJC4000 | User Guide - Page 6
    Settings 57 Step 3: Configure the Controller for a Serial Port Connection 58 Controlling PTZs 59 Step 1: Keyboard Setup 59 Step 2: Camera Selection 60 Operating a PTZ Camera 60 5 System Administration and Troubleshooting 65 System Administration Using the Controller LCD 65 Logging in and
  • Honeywell HJC4000 | User Guide - Page 7
    RJ45 Box Front and Back Ports 19 UltraKey Touch Controller Keyboard Layout 22 UltraKey Touch Navigation Controls 24 LCD and LCD Navigation Keys 26 DVR Configuration Menu Tree 26 Connecting the Controller for DVR Control 28 Connecting the Controller for DVR Control Using RS485 32 Ethernet Port
  • Honeywell HJC4000 | User Guide - Page 8
    Figures 8
  • Honeywell HJC4000 | User Guide - Page 9
    User Guide Tables Table 1-1 Table 1-2 Table 2-1 Table 2-2 Table 3-1 Table 3-2 Table 3-3 Table 3-4 Table 3-5 Table 3-6 Table 3-7 Table 3-8 Table 3-9 Table 3-10 Table 3-11 Table 4-1 Table 4-2 Table 4-3 Table A-1 Table A-2 Table A-3 Shipping Checklist 17 UltraKey Touch Specifications 20 UltraKey
  • Honeywell HJC4000 | User Guide - Page 10
    Tables 10
  • Honeywell HJC4000 | User Guide - Page 11
    UltraKey Touch Installation and User Guide About this Document In this section: • Overview of the Contents, page 11 • Explanation of Symbols, page 11 • Cautions and Warnings, page 12 • Important Safety Instructions, page 14 • Warranty and Service, page 15 • Finding More Information, page 15 •
  • Honeywell HJC4000 | User Guide - Page 12
    with arrowhead symbol within an equilateral triangle alerts the user to the presence of uninsulated dangerous voltage within the loss of data or damage to equipment and may contain important operating and maintenance servicing information. Cautions and Warnings Installation and servicing should be
  • Honeywell HJC4000 | User Guide - Page 13
    reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is
  • Honeywell HJC4000 | User Guide - Page 14
    manufacturer declares that the equipment supplied with this guide is compliant with the essential protection requirements of unit and in the operating instructions. 2. INSTALLATION • Install in accordance with the manufacturer's instructions. • Installation and servicing should be performed only by
  • Honeywell HJC4000 | User Guide - Page 15
    problem with any Honeywell product, please call Customer Service PDF format including data sheets, quick references, installation and user guides, specifications, software and product notices: http://www.honeywellvideo.com. Also see the back cover for international keys. On the controller, press Alt
  • Honeywell HJC4000 | User Guide - Page 16
    you select Buttons you click to perform actions. Pressing a key on the keyboard. Italic Placeholders: words that vary depending on the situation Cross-reference to external close the program. Press and hold Login. user name Refer to the System Administrator Guide. See Chapter 2, Installation. 16
  • Honeywell HJC4000 | User Guide - Page 17
    UltraKey Touch keyboard controller (HJC4000) is a replacement for the Honeywell HJZTP controller and is compatible with Honeywell DVRs and PTZs. The UltraKey Touch can control UltraKey Touch keyboard controller All installations. 1 UltraKey Touch installation and user All installations. guide 1
  • Honeywell HJC4000 | User Guide - Page 18
    Touch Port Connections and Descriptions Figure 1-1 Power UltraKey Touch Port Connections RJ45 Ethernet RS232 and RS485 Serial Port 1 8 1 8 Pins are numbered from left to right DC Power Port Supports 12V (±10%) DC/1 A power input. Use the power adapter included with the shipment and
  • Honeywell HJC4000 | User Guide - Page 19
    UltraKey Touch Installation and User Guide RS232, RS485 Serial Port RJ45 Box Note These ports are used to connect to DVR RS232/485 or PTZ RS485 ports. An isolated surge protector
  • Honeywell HJC4000 | User Guide - Page 20
    Touch Overview UltraKey Touch Specifications Table 1-2 UltraKey Touch Specifications Parameter Value Power Requirement 10.8 to 13.2 VDC @ 1 Ampere (A) Connector Types 1 × Ethernet (10Base-T, 100Base-TX) RJ45 with LED 1 × RS232/485 RJ45 with LED
  • Honeywell HJC4000 | User Guide - Page 21
    both before and after you begin configuring. This section covers: • Logging Onto the Controller on page 21 • Using the UltraKey Touch to Navigate the LCD Menus on page 21 Logging Onto the Controller 1. Connect the keyboard with a power adapter (12V [±10%] DC/1 A included). 2. Press Login on the
  • Honeywell HJC4000 | User Guide - Page 22
    Using the UltraKey Touch Controller Figure 2-1 UltraKey Touch Controller Keyboard Layout No. Icon 1 3 5 7 9 11 13 15 17 22 Table 2-1 UltraKey Touch Controller Keys and Controls Description No. Icon Description LCD screen 2 Alarm key Sequence key 4 Iris open / close key Set key 6
  • Honeywell HJC4000 | User Guide - Page 23
    29 31 UltraKey Touch Installation and User Guide Table 2-1 UltraKey Touch Controller Keys and Controls (cont'd) Description No. Icon Description Monitor key 20 Camera key Alt key 22 PTZ Call key Touch pad slider 24 Operations with the touch pad are described in these instructions as
  • Honeywell HJC4000 | User Guide - Page 24
    Using the UltraKey Touch Controller Figure 2-2 UltraKey Touch Navigation Controls Touch Pad and Ring Touch pad ring Left Joystick Left arrow key Right arrow key Up arrow key Center key is not used for controlling Down arrow key Move the joystick left and right or up and down to navigate the
  • Honeywell HJC4000 | User Guide - Page 25
    all connections, refer to the applicable DVR user guides for more information. This section explains how to connect the UltraKey Touch controller to a DVR and how to enter the basic configuration settings specific to that DVR. UltraKey Touch can control the remote DVR through either of the serial
  • Honeywell HJC4000 | User Guide - Page 26
    Connecting UltraKey Touch to a DVR Navigating the LCD Configuration Menus Figure 3-1 LCD and DVR PTZ COM2 (RS232) Show Net Infor Manual Settings DHCP DVR Selection HRDP / FUSION / HRXD Basic Set DVR / CAM PORT SELECT Serial Settings Baud Rate Data Bit Parity Stop Bit IP Address Gateway
  • Honeywell HJC4000 | User Guide - Page 27
    User Guide Connect to the UltraKey Touch Using the Serial Port (RS232) Step 1: Connect to the UltraKey controller power port and the adapter into a power source. 3. Connect the RJ45 network cable to the controller cascade linkage for UltraKey Touch, see Keyboard Configuration for Cascade Linkage (
  • Honeywell HJC4000 | User Guide - Page 28
    to select a different DVR type. 1. Install and connect the controller to a power source, if it is not already connected. 2. Press Login, and then enter the password, 1234. This indicates that the keyboard is in PTZ mode. This indicates that the keyboard is in DVR mode. CAM 001 ST User2 CAM
  • Honeywell HJC4000 | User Guide - Page 29
    UltraKey Touch Installation and User Guide 5. Press Ent to enter the DVR Selection menu. Press the Slider_Up/Down to select the DVR to control. DVR to exit from the DVR configuration menu. 2. Before using the UltraKey Touch keyboard to control Fusion/HRXD/HRDP DVRs, it must be setup to meet the
  • Honeywell HJC4000 | User Guide - Page 30
    Here you can set the Com2 (RS232) settings for parity, baud rate, data bit and stop bit: a. Press the Slider_Right to select Parity. Press Ent see the Shipping Checklist on page 17, and for port connections, see UltraKey Touch Port Connections and Descriptions on page 18. 1. Select the applicable
  • Honeywell HJC4000 | User Guide - Page 31
    UltraKey Touch Installation and User Guide 2. Plug the AC adapter into the controller power port and the adapter into a power source. 3. Connect the RJ45 network cable to the serial port of the controller and the RJ45 box. 4. Connect the pins (RS485+, RS485-) of the RJ45 box to the pins (T/R+,
  • Honeywell HJC4000 | User Guide - Page 32
    DVR Use Note Set the DVR type in the Ultrakey Touch configuration to be the same as the connected DVR type. If any other type has been selected, then use the following procedure to select a different DVR type. 1. Install and connect the controller to a power source, if it is not already connected
  • Honeywell HJC4000 | User Guide - Page 33
    UltraKey Touch Installation and User Guide 2. Press Login, and enter the password, 1234. This indicates that the keyboard is in PTZ mode. CAM 001 ST User2 This indicates that the keyboard the Slider_Up / Down to select the DVR to control. DVR Selection Fusion DVR Selection HRDP DVR Selection
  • Honeywell HJC4000 | User Guide - Page 34
    Connecting UltraKey Touch to a DVR Table 3-5 Type Baud Rate Parity DataBit StopBit Serial Port Com1 ( or 57600. Press Ent to save. c. Press the Slider_Up/Down or the LCD up/down arrow keys to select Data Bit. Press Ent and use the Slider_Up/Down or the LCD up/down arrow keys to select 7 bit or
  • Honeywell HJC4000 | User Guide - Page 35
    network cable from the network to the controller Ethernet port (see Figure 3-5). 4. Connect a DVR to the network. Refer to the applicable DVR Installation Guide for instructions. Note To setup cascade linkage for UltraKey Touch, see Keyboard Configuration for Cascade Linkage (Additional) on page
  • Honeywell HJC4000 | User Guide - Page 36
    Touch Network Port Network Cable NETWORK Network Cable Network Cable Network Port Network Port Network Cable Network Port Master Slave 1 Step 2: Configure the UltraKey Touch for DVR Use Slave 2 Note If any mode other than DVR has been selected, then use the procedure in Step 2: Configure
  • Honeywell HJC4000 | User Guide - Page 37
    Installation and User Guide 4. Press Slider_Down, the menu displays (one of): Network: DHCP Network: Manual Setting Network: Show Net Infor 5. Select the Network: Manual Setting menu and press Ent to confirm. Press the Slider_Up/Down or the LCD up/down arrow keys to setup the UltraKey Touch
  • Honeywell HJC4000 | User Guide - Page 38
    UltraKey Touch to a DVR Note The IP address of the master or slave keyboard is both referred to IP address in the Network menu. 1. Press Alt > Clr and scroll with the slider. The Cascade Linkage menu appears. System Configuration Cascade Linkage 2. In cascade mode, you can set the keyboard
  • Honeywell HJC4000 | User Guide - Page 39
    Touch Installation and User Guide Configuring UltraKey Touch Using the Web Browser (Optional) Logging into the Web Browser 1. Input, navigate to, or copy and paste, the applicable IP address into your web
  • Honeywell HJC4000 | User Guide - Page 40
    3-8). 2. Set the DVR type to be the same as the controlled DVR in the DVR Type drop-down list. Select DVR type as Fusion, HRXD/HRSD, or HRDP. 3. Cascade Mode settings are used for the Cascade Linkage of keyboards. a. Set the Ultrakey Touch as Master or Slave in the Mode drop-down list
  • Honeywell HJC4000 | User Guide - Page 41
    UltraKey Touch Installation and User Guide Figure 3-8 Standalone Configuration for DVR Tab Side menu Step 3A: Configure the Controller for or 57600 bps. • Parity: none, even, or odd. • Stop Bits: 1 or 2 bits. • Data Bits: 7 or 8 bits. • Serial Mode: RS232 or RS485. 3. If required, repeat step 2 for
  • Honeywell HJC4000 | User Guide - Page 42
    Connecting UltraKey Touch to a DVR Figure 3-9 Serial Port Configuration Tab Side menu Step 3B: Configure the Controller IP for an Ethernet Connection 1. From the side menu, click IP Configuration (see Figure 3-10). 2. Enter IP Address, Subnet Mask, Gateway and DNS values in
  • Honeywell HJC4000 | User Guide - Page 43
    UltraKey Touch Installation and User Guide Figure 3-10 IP Configuration Tab Side menu Controlling a FUSION DVR Step 1: Connection See Figure 3-3 on page 28, and Figure 3-4 on page 32. Step 2: Select DVR Type 1. Press Alt + Clr to enter the Standalone
  • Honeywell HJC4000 | User Guide - Page 44
    Connecting UltraKey Touch to a DVR Step 3: DVR and Camera Connection 1. Press the Slider_Right DVR as CAM 1 1. Press the Slider_Left to save the configuration and DVR 1 exit the menu. 3. The keyboard can control 1, 4, 9, and 16-channel DVRs. For example, if a system has 33 cameras with: • DVR
  • Honeywell HJC4000 | User Guide - Page 45
    UltraKey Touch Installation and User Guide You want to... Table 3-8 Operating a Fusion DVR Do this... Auto the keyboard operations for navigating the Search Date Set menu. Press... To... Press... To... F2 Up F8 Right F7 Down Ent Confirm F6 Left Clr Esc Display video of the
  • Honeywell HJC4000 | User Guide - Page 46
    UltraKey Touch to a DVR Controlling an HRXD/HRSD DVR Step 1: Connection See Figure 3-3 on page 28, and Figure 3-4 on page 32. Step 2: Keyboard Setup for Connection HRXD DVR setup is the same as the FUSION DVR setup except that you select HRXD (see Controlling menu. If the user presses F1 when in
  • Honeywell HJC4000 | User Guide - Page 47
    UltraKey Touch Installation and User Guide an alarm is active, press Alarm to reset the DVR output (internal buzzer included). Display the alarm event log If the DVR is to exit the Search menu. Play video Press Review to playback or pause the DVR video. Switch between live monitoring and pause
  • Honeywell HJC4000 | User Guide - Page 48
    Connecting UltraKey Touch to a DVR You want to... Table 3-9 Zoom in on an image on the screen To control PTZ domes Operating an HRXD DVR Do this... Press Set. Press Alt > Set to enable HJC4000 to control PTZ domes. Note For more information about PTZ operation for HRXD, see Step 2: Camera
  • Honeywell HJC4000 | User Guide - Page 49
    UltraKey Touch Installation and User Guide to change the playback speed. Zoom in on video Image Zoom function is not supported in Live or Search mode. But when in Search mode. Navigate the menu See the table below for the keyboard operations for navigating menus. Press... F2 F7 F6 To... Up Down
  • Honeywell HJC4000 | User Guide - Page 50
    right Note You cannot use the keyboard to stop panning or tilting. Note The Iris, Focus, and Preset Store (View+Num+Set) keys are not supported. The Preset Call (View+Num+Ent or Num+View) key is supported. Joystick Controls Table 3-11 Joystick Controls Control Joystick up/down Joystick left
  • Honeywell HJC4000 | User Guide - Page 51
    Touch Using the Web Browser (Optional) on page 56 • Controlling PTZs on page 59 Note For all installations, refer to the applicable PTZ installation or user guides for more information. This section explains how to connect the UltraKey Touch controller to a PTZ camera and how to enter the basic
  • Honeywell HJC4000 | User Guide - Page 52
    DVR COM1 (RS485) Show Net Infor Manual Settings DHCP PTZ Settings Protocol / Address / Name Serial Settings Baud Rate Parity Data Bit Stop Bit IP Address Gateway NetMask DNS Installing and Configuring a Serial Connection Step 1: Connect to the UltraKey Touch Serial Port Note For a list
  • Honeywell HJC4000 | User Guide - Page 53
    UltraKey Touch Installation and User Guide RS485 Serial Port Connecting to a PTZ using the RJ45 Box: 1. Select the applicable adapter plug and insert it into the AC adapter. Push to click it into place. See Figure 4-2. 2. Connect an RJ45 network cable from the RJ45 Box port to the controller serial
  • Honeywell HJC4000 | User Guide - Page 54
    the PTZ Name, Address, and Protocol. 1. Install and connect the controller to a power source, if it is not already connected. The UltraKey Touch LCD displays. This indicates that the This indicates that the keyboard is in PTZ mode. keyboard is in DVR mode. CAM 001 CAM 001 DVR 1 ST User2
  • Honeywell HJC4000 | User Guide - Page 55
    UltraKey Touch Installation and User Guide bit. Press Ent to save. Data Bit d. Press LCD up/down Troubleshooting on page 65. Otherwise the installation and configuration is complete. 7. After finishing keyboard setup, press Slider_Left to return to the main menu. 8. To select a camera for control
  • Honeywell HJC4000 | User Guide - Page 56
    : http://192.168.1.9. 2. Enter Administrator (case sensitive) in the User Name field (see Figure 4-3). 3. Enter 1234 (default) in the Password field. 4. Click Login. Figure 4-3 UltraKey Touch Login page Step 1: Configure UltraKey Touch to System Configurations 1. Log into the web browser. 2. From
  • Honeywell HJC4000 | User Guide - Page 57
    UltraKey Touch Installation and User Guide Figure 4-4 System Configuration Tab Step 2: Standalone Configuration for PTZ Settings 1. From the side menu, click Standalone Configuration (see Figure 4-5). 2. Under DVR Setting drop-down list, set DVR type as same as the controlled DVR. 3. Under Cascade
  • Honeywell HJC4000 | User Guide - Page 58
    Installing UltraKey Touch with PTZ Figure 4-5 Standalone Configuration for PTZ Tab Step 3: Configure the Controller for a Serial Port , or 57600 bps • Parity: none, even or odd • Stop Bits: 1 or 2 bits • Data Bits: 7 or 8 bits • Serial Mode: RS485 3. Click Apply to save the configuration, Cancel to
  • Honeywell HJC4000 | User Guide - Page 59
    Touch Installation and User Guide Figure 4-6 Serial Port Configuration Tab Controlling PTZs Step 1: Keyboard Setup For a connection between Ultrakey Touch and a PTZ, see Figure 4-2. Certain settings should be done before using the direct control of PTZ with Ultrakey Touch. 1. Set COM1 (RS485
  • Honeywell HJC4000 | User Guide - Page 60
    Set: PTZ Note The UltraKey Touch supports five PTZ Protocols: Pelco P, Pelco D, Diamond, VCL, and Intellibus. You must set the PTZ's Protocol to be consistant with the controlled PTZ. Step 2: Camera Selection 1. Return to the main menu of standalone mode after finishing keyboard setup 2. Enter
  • Honeywell HJC4000 | User Guide - Page 61
    UltraKey Touch Installation and User Guide 2. PTZ - Tour Press Ent Ent to enter the Sel Character menu on the Preshot Menu keyboard LCD. Press the LCD Right/Left arrow keys to skip character pages , Diamond protocol does not support Baud Rates of 1200 and 2400. All other Baud Rates are
  • Honeywell HJC4000 | User Guide - Page 62
    Installing UltraKey Touch with PTZ PTZ call for Intellibus Protocol Familiarize yourself with these basic operations before you start configuring the menus: • Press Ent to enter the setup menu and the submenus displayed on the LCD screen. Press the number on the keyboard to select a submenu, then
  • Honeywell HJC4000 | User Guide - Page 63
    UltraKey Touch Installation and User Guide or delete presets in the Setup menu. Press PTZ call on the keyboard to select the Setup menu. Press Ent to confirm. Press the protocol only supports three Baud Rates: 9600, 19200, and 38400. Also, Intellibus protocol does not support Cascade Linkage. Document
  • Honeywell HJC4000 | User Guide - Page 64
    Installing UltraKey Touch with PTZ 64
  • Honeywell HJC4000 | User Guide - Page 65
    Troubleshooting This section covers: • System Administration Using the Controller LCD on page 65 • System Administration Using the Web Browser on page 67 System Administration Using the Controller and connect the controller to a power source. CAM 001 DVR 1 ST Logout The UltraKey Touch LCD
  • Honeywell HJC4000 | User Guide - Page 66
    System Administration and Troubleshooting Restore Default 1. Log into the controller. 2. From the System Configuration menu, menu. Slider Firmware: Download: ok Viewing the Firmware Version 1. Log into the controller. 2. From the System Configuration menu, press Slider_Up/Down to scroll to About.
  • Honeywell HJC4000 | User Guide - Page 67
    UltraKey Touch Installation and User Guide 3. Press Slider_Up/Down keys and press Ent to select the joystick are displayed on the LCD. Device Test: Joystick • SerialPort: Confirms that the controller serial port is functioning. Device Test: SerialPort • Slider: When you rotate the touch pad,
  • Honeywell HJC4000 | User Guide - Page 68
    and Troubleshooting The Upgrade Status window opens. Messages display to indicate when old files are being erased and new files are being copied. When the process is complete, the message Upgrade success displays and the system reboots. Figure 5-1 Software Upgrade Warning Message Rebooting UltraKey
  • Honeywell HJC4000 | User Guide - Page 69
    UltraKey Touch Installation and User Guide Figure 5-2 Change Password Page Document 800-06554 Rev C 69 02/11
  • Honeywell HJC4000 | User Guide - Page 70
    System Administration and Troubleshooting 70
  • Honeywell HJC4000 | User Guide - Page 71
    a number key + DVR, or DVR + number + Ent to select a DVR to control. Press 4+1 + Split to display in 4A grid Press 4+2 + Split to display in to enter FOCUS mode. Press to play recorded videos in reverse in Search mode. Stops video playback. Play video forwards in Search mode. If only one
  • Honeywell HJC4000 | User Guide - Page 72
    playback. Up, down, left, right, confirm, esc Press F3 to display video of the previously selected camera. Press F4 to display the 4-split screen. Function... Press a number key, then DVR to select a DVR to control. For entering passwords. Press to open the password screen. Press and hold
  • Honeywell HJC4000 | User Guide - Page 73
    UltraKey Touch Installation and User Guide Keys... Alarm Monitor Recycle Live/Search Review Stop Next Frame Previous Frame Forward Backward Set PTZ Control Table A-2 HRXD/HRSD Operations (cont'd) Function... If an alarm is active, press Alarm to reset the output of DVR (including internal buzzer
  • Honeywell HJC4000 | User Guide - Page 74
    View key) Not supported. Joystick_Up/Down Navigation mode: move the cursor up / down. Playback mode: start a Panorama/Smart search. PTZ mode: same controls as a Fusion DVR. Joystick_Left/Right Navigation mode: move the cursor left / right. Playback mode: play recorded videos forwards or reversed
  • Honeywell HJC4000 | User Guide - Page 75
    UltraKey Touch Installation and User Guide System Configuration Menu Tree Figure A-1 Network System Configuration LCD Menu Tree - All Modes Show Net Infor Manual Settings IP Address NetMask DHCP Gateway DNS Slider Update System Configuration Hardware Test Cascade Linkage Serial Port
  • Honeywell HJC4000 | User Guide - Page 76
    DVR Operation Commands 76
  • Honeywell HJC4000 | User Guide - Page 77
  • Honeywell HJC4000 | User Guide - Page 78
    Italia, n° 7 P.I. - C.T.C. Coslada 28820 Coslada, Madrid, Spain www.honeywell.com/security/es  +34.902.667.800 www.honeywellvideo.com +1.800.796.CCTV (North America only) [email protected] Document 800-06554 - Rev C - 02/11 © 2011 Honeywell International Inc. All rights reserved. No part of
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
Document 800-06554 – Rev C – 02/11
Installation and User Guide
UltraKey Touch
DVR and PTZ Keyboard Controller
HJC4000