Honeywell HPS5 Installation Guide - Page 1
Honeywell HPS5 Manual
View all Honeywell HPS5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Honeywell Power Products 12 Clintonville Road Northford, CT 06472 http://www.honeywellpower.com HPS5 PRODUCT INSTALLATION DOCUMENT PN 52249:B 11/09/2004 ECN 04-580 HPS5: High Current Power Supply/Charger 1 Introduction The HPS5 power supply/battery charger converts a low voltage AC input into an output of 6 VDC, 12 VDC or 24 VDC @ 4.0 amps of continuous supply current (refer to the Specifications section). This general purpose switching power supply can provide additional power for a variety of applications such as access control, security and CCTV system accessories. 2 Specifications HPS5.wmf • DIP Switch selectable for 6 VDC, 12 VDC or 24 VDC output. DC LED • 4.0 amps of continuous supply current*. • Output is filtered and electronically regulated. • Built-in charger for sealed lead acid or gel type batteries. • Maximum charge current of 400 mA. If a battery charger is used, subtract max charge current of 400 mA from total to determine allowable load. TB1 DC + DC - BAT + BAT - • Automatically switches to stand-by battery upon AC fail. AC • Battery protected from short circuits. AC • Thermal and short circuit protection with auto reset. • LED indicators for AC input and DC output. AC LED SW1 • Compact design (board dimension 3.5"L x 2.75"W x 1.75"H). • Battery leads and foam mounting tape included. *Specified at 25ºC ambient. 3 Voltage Output and Transformer Selection: SW1 DIP Switch Output Voltage Transformer Requirements Switch 1 Switch 2 6 VDC ON OFF 24 VAC / 50 VA (model HTP2450)* 12 VDC OFF OFF 28 VAC / 100 VA (model HT28100) 24 VDC OFF ON 28 VAC / 175 VA (model HT28175) *Transformers are sized for maximum load at rated voltage output. Greater voltage output is possible with a larger transformer. IMPORTANT! Transformers with higher power (VA) ratings may be used for all output voltages selected above provided the input voltage does not exceed 28VAC.