Honeywell HWLHZ338 User Guide - Page 3
Oscillation, Remote Control Operation Hz-336, Series, Model Hz-336, Model, Hz-335, Power, Set
UPC - 929263410152
View all Honeywell HWLHZ338 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
OSCILLATION POWER: High Power Low Power • The Oscillation feature functions in any power or mode setting. • Press the Oscillation button to toggle this feature on and off. REMOTE CONTROL OPERATION (HZ-336 SERIES): Power Basic Remote LCD Remote • Press Power once to start the heater on High Power, Continuous Run. • Press Power again to change to Low Power, Continuous Run. • Press Power a third time to turn the heater off. Two (2) AAA batteries required. Model HZ-336: Remote Control included when originally purchased. Model: HZ-335: Remote Control may be purchased separately at: www.honeywellconumerproducts.com MODE: SET TEMPERATURE Set Temperature Mode Adjust Up or Down The Remote Control works the same as the corresponding buttons on the Control Panel. The Control Panel display on the heater will show the appropriate icons when the various functions are activated. Basic Remote LCD Remote • Press Mode until the Temperature icon blinks. The current room temperature will appear. • Use the Up or Down arrows to set the desired temperature. • The Temperature icon will stop blinking and the current room temperature will reappear after the desired temperature is set. • The heater will turn-off shortly after the desired temperature is reached and the Power light above the display will blink. • The heater will turn back on when the room temperature drops approximately 2 degrees below the desired temperature. The Power light will stop blinking and will remain lit. 3