Honeywell NS1 User Guide - Page 5

ADDING CARDS WITH THE ADD MASTER CARD If new cards are to be added to the system, they must be programmed in the NS1. An easy way to add cards is by using the Add Master card. To add cards with the Add Master card, perform the steps indicated in Figure 7. A card that already has been learned to the NS1 or a card that cannot be read correctly, will cause the NS1 to generate an error. 1. Enter Add mode by presenting Add Master. 2. Add new User cards (present each new card). 3. Present Add Master to resume normal operation. Add Master New User Add Master Figure 7 Using the Add Master Card VOIDING CARDS WITH THE VOID MASTER Using Void Master is an easy way of removing cards from the NS1, provided that the cards that have to be removed are available. Perform the steps indicated in Figure 8 to use the Void Master. 1. Enter Void mode by presenting Void Master. 2. Void old User cards (present each card that must be voided). 3. Present Void Master to resume normal operation. Void Master Old User Void Master Figure 8 Using the Void Master TD1168 rev1003 5 - 8