Honeywell RTH7000 Owner's Manual - Page 24
Operating Manual
View all Honeywell RTH7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Operating Manual AInbcoausteyoouf rdnifefiwcutlhtyermostat Heating or • Press SYSTEM to set system to Heat. Make sure the temperature is set cooling system higher than the Inside temperature. does not respond • Press SYSTEM to set system to Cool. Make sure the temperature is set lower than the Inside temperature. • Check circuit breaker and reset if necessary. • Make sure power switch at heating & cooling system is on. • Make sure furnace door is closed securely. • If "Wait" is displayed, the compressor protection timer is on. Wait 5 minutes for the system to restart safely, without damaging the compressor (see page 18). 69-2222EF-03 22
Operating Manual
69-2222EF—03
22
About your new thermostat
In case of difficulty
Heating or
cooling system
does not respond
•
Press
SYSTEM
to set system to Heat. Make sure the temperature is set
higher than the Inside temperature.
•
Press
SYSTEM
to set system to Cool. Make sure the temperature is set
lower than the Inside temperature.
•
Check circuit breaker and reset if necessary.
•
Make sure power switch at heating & cooling system is on.
•
Make sure furnace door is closed securely.
•
If “Wait” is displayed, the compressor protection timer is on. Wait
5 minutes for the system to restart safely, without damaging the
compressor (see page 18).