Honeywell T8002 Owner's Manual - Page 18
Set SYSTEM switch to Cool.
View all Honeywell T8002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Troubleshooting (Continued). Symptom Cooling does not come on. Action • Check if the circuit breaker is tripped-reset the circuit breaker. • Check if the fuse is blown-replace the fuse. • Check if the switch at the equipment is in the Off position-set to On position. • Wait five minutes for the system to respond. • Set SYSTEM switch to Cool. • If the temperature setting is lower than the current room temperature and the snowflake is displaying, the thermostat is operating correctly. Contact an air conditioning contractor for assistance. continued 18 69-1431-1
69-1431–1
18
Troubleshooting
(Continued)
.
continued
Symptom
Action
Cooling does not come on.
•
Check if the circuit breaker is tripped—reset the
circuit breaker.
•
Check if the fuse is blown—replace the fuse.
•
Check if the switch at the equipment is in the Off
position—set to On position.
•
Wait five minutes for the system to respond.
•
Set SYSTEM switch to Cool.
•
If the temperature setting is lower than the current room
temperature and the snowflake
is displaying, the
thermostat is operating correctly. Contact an air
conditioning contractor for assistance.