Honeywell T8700C Owner's Manual - Page 5

The following sequence uses the heating program as an example. To change to the cooling program, move the System switch to the COOL position and enter the cooling temperature settings. To exit at any time, press until End is displayed. 1. Set current time. a. Press . PM b. Press or to set current time. To change the preprogrammed time/temperature settings, follow steps 2 through 6. If not, press the key until End is displayed or the thermostat will automatically return to normal operational mode within five minutes. 5 2. Set WAKE TIME. a. Press . AM b. Press or to set desired WAKE time. 3. Set WAKE SET TEMPERATURE. AM a. Press . b. Press or to set desired WAKE temperature. 69-1099