Honeywell TH8110U1003 Owner's Manual - Page 29
VisionPRO, TH8000 Series - wait
UPC - 085267256872
View all Honeywell TH8110U1003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
ENGLISH In case of difficulty VisionPRO® TH8000 Series Heating or • Press SYSTEM to set system to Heat. Make sure the temperature is set cooling system higher than the Inside temperature. does not respond • Press SYSTEM to set system to Cool. Make sure the temperature is set lower than the Inside temperature. • Check circuit breaker and reset if necessary. • Make sure power switch at heating & cooling system is on. • Make sure furnace door is closed securely. • If "Wait" is displayed, the compressor protection timer is on. Wait 5 minutes for the system to restart safely, without damaging the compressor (see page 15). Display shows Fan Auto and On or Auto and Circ at the same time • This is normal operation. Auto indicates the thermostat is following the programmed fan setting. If Auto and On is shown, the fan is scheduled for "On" during this period (see page 7). 27 69-1894EFS-01