Hoover F6215 Manual - Page 12
Routine care for your Deep Cleaner
UPC - 073502027356
View all Hoover F6215 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
41 42 43 44 45 12 D FE A B C G Routine care for your Deep Cleaner Clean the nozzle Unplug deep cleaner from electrical outlet. ® Remove solution and recovery tanks to prevent possible leaks. ® Lift up on top of nozzle (A) and slide off cleaner (Fig. 41). ® Wipe debris off nozzle and front of cleaner with a damp cloth. ® Tilt cleaner back, raising front of cleaner off floor. Slide nozzle (B) up from bottom of cleaner (Fig. 42). ® Press on upper portion of nozzle to snap in place. Clean the brushes Unplug deep cleaner from electrical outlet. ® Remove solution and recovery tanks to prevent possible leaks. ® Tilt cleaner back so handle rests on the floor. ® Pull brush assembly firmly to remove (Fig. 43). ® Rinse brushes under running water. ® Align posts (C) on brush assembly with slots (D) in cleaner (Fig. 44). ® Turn brushes slightly to align square post (E) with square hole (F) in cleaner (Fig. 44). ® Press brush assembly firmly and snap in place. Clean the brush filter Unplug deep cleaner from electrical outlet. ® Remove solution and recovery tanks to prevent possible leaks. ® Tilt cleaner back so handle rests on the floor. ® Squeeze filter frame (G) and pull it out until it stops (Fig. 45). ® Wipe debris off filter. ® Slide filter back into place.