Hoover SH40080 Manual - Page 9

CYCLONE SEPARATOR ! WARNING ! To reduce the risk of personal injury, unplug vacuum before cleaning or servicing. Do not use vacuum without dirt cup or filters in place. 3.3 How to Clean Remove dirt cup as described in Fig. 3.1. 3.3 Twist filter assembly counterclockwise. Remove assembly from dirt cup. 3.4 Gently tap on the inside of a trash receptacle to remove dust and dirt. 3.5 Dirt and debris can be cleaned from the filter assembly with dusting brush or a towel or rag. Replace the filter assembly on the dirt cup, and twist it clockwise to secure into position. Replace dirt cup. IMPORTANT The cyclone separator should not be submerged in water. 3.4 3.5 FILTERS Rinsable Filter ! WARNING ! To reduce the risk of personal injury, unplug vacuum before servicing. Do not use vacuum without dirt cup or filters in place. Allow filter to dry completely before replacing. When to Clean It is recommended that the Rinsable filter be checked and cleaned at least every 2 months or more frequently with heavy use. How to Clean Remove dirt cup as described in Fig. 3.1. 3.6 Twist dirt cup lid counterclockwise and remove Rinsable filter. 3.7 Grasp tab on filter and remove from filter cartridge. 3.8 Gently tap the filter and filter cartridge on the inside of a trash receptacle to remove dust and dirt. 3.9 Hold Rinsable filter under running water to clean. Allow to air dry for 24 hours before replacing. Replace filter in dirt cup and twist lid clockwise until secure. Replace dirt cup. 3.6 3.7 3.8 3.9 IMPORTANT Rinsable can be rinsed in warm water (max 40°C). Allow to air dry for 24 hours before replacing. Do NOT use any detergents or boiling water to wash filter. What to Buy: Rinsable Filter When used and maintained properly, your Rinsable Filter should not need replacement within the warranty period. If desired, an additional filter is available at Hoover.com or call 1-800944-9200. Ask for Hoover® Part No. 304285001 9 Actual model may vary from images shown.