Hoover U5265-900 Manual - Page 4
How to use
View all Hoover U5265-900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
2. How to use Cleaner description 2-1 1 3 2 4 9 11 21 19 18 20 5 6 7 8 10 20 12 1. Folding handle 15. Hose 2. Upper handle release button 3. Power Boost Switch 4. Dirt cup latch 5. Carrying handle 16. Furniture nozzle 17. Dusting brush 18. Extension wand 19. Crevice wand: stores inside wand 6. Pre-filter 20. Cord hooks: wrap 7. HEPA filter (inside filter cord around hooks for chamber) storage. The top hook 8. Dirt cup (Twin Chamber) rotates to the left for 9. Dirt cup lid easy cord release. 10. Headlight 11. Stair cleaning handle: located above the 21. ON-OFF-HUSH™ switch: located on front of cleaner body 17 headlight. 12. Hood Operate cleaner only at 13. Carpet height adjustment voltage specified on 15 knob: rotate knob to cor- data plate on bottom of rect setting for height of cleaner. carpet being cleaned. 16 14. Handle release pedal: This cleaner is intended step on pedal to lower for household use. handle to operating or low positions. 13 14 Polarized plug To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. 2-2 A Hose connection Hose must be attached to cleaner base for floor cleaning. To attach hose, use the end of the hose to push the cover (A) down and push hose onto opening. Twist hose end slightly to tighten the connector. 4 2-3 B ON-OFF-HUSH™ switch Plug cord into electrical outlet. To turn cleaner ON, push switch (B) up. To turn cleaner OFF, push switch to middle position. For quieter vacuuming, push switch down (HUSH) position. Put Power Boost Switch in neutral when using ON or HUSH setting. 2-4 C Power Boost Switch Use the Power Boost Switch (C) to add extra cleaning power for cleaning heavily soiled areas and for picking up dry debris spills. Push the switch forward for a temporary boost. When released, the boost will automatically go to the "neutral" position. Push the switch back to lock it in the Boost position. To unlock, push the switch forward to the "neutral" position. Use the lock position for larger areas or when using the cleaning tools. The Boost can be used with either the ON or HUSH mode selected (see Fig. 2-3). Put Power Boost Switch in neutral when using ON or HUSH setting.