Hoover UH60010 Product Manual - Page 3
Assembling cleaner - model
UPC - 073502030752
View all Hoover UH60010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
1. Assembling cleaner This cleaner was inspected and packaged carefully before being shipped from the factory. If you should happen to need assistance during assembly or operation, Visit us online at www.hoover.com to find the service outlet nearest you (click on the "Service" button) OR Call 1-800-944-9200 for an automated referral of authorized service outlet locations (U.S. only) OR Call 1-330-499-9499 to speak with a representative in our Consumer Response Center. Carton contents 1-1 Accessories C D A B Remove all parts from carton and identify each item shown. Make sure all parts are located before disposing of packing. A. Handle section B. Cleaner body C. Handle screw packet (in bag with owner's manual) EI F G H The accessories are packed on the cleaner. Not all accessories are included with every model. D. Hose* E. Dusting brush F. Furniture nozzle G. Wands H. Crevice wand I. Powered hand tool *some models include an extra hose Note: The white switch lock above the ON/OFF switch aids in the assembly of your cleaner. Assembly can be continued if the switch lock is missing. However, do not remove the switch lock until assembly is completed. Easy 3-step assembly 1-3 1-4 1-2 D A Looking at the back of the cleaner, make sure switch (A) is in the OFF position. It may be necessary to move the hose in order to attach the handle. Slide handle into back of cleaner. Push 4 screws into holes on back of handle. Using a Phillips screw driver, tighten screws securely. B C Remove switch lock (B) above ONOFF switch (C) on front of handle by pulling it straight out. Dispose of lock. If switch lock has come off during assembly, make sure switch is in OFF position (down) before plugging cord into electrical outlet. Remove label (D) from self-propel button. Continued § 3