Hoover UH70100RM Product Manual - Page 7
Important, Warning - model
View all Hoover UH70100RM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
CARPET HEIGHT ADJUSTMENT 2.6 A To adjust Height setting, PUSH DOWN and TURN knob (A) to desired setting. For maximum cleaning performance, the following carpet height settings are recommended: • Lowest setting: for all types of carpet and bare floors. • Higher settings: for very deep pile carpet, where easier pushing effort is desired, while maintaining good cleaning performance. IMPORTANT If the vacuum is difficult to push, push down and turn knob to the next higher setting. 3. TOOLS Tools allow for cleaning surfaces above the floor and for reaching hard to clean areas. The vacuum is ready for tool use when handle is in upright position. IMPORTANT Brushroll continues to turn while product is turned on and handle is in upright position. To avoid damage to carpet, rugs, furniture and flooring, avoid tipping cleaner or setting it on furniture, fringed area rugs, or carpeted stairs during tool use. Select Proper Tool (Tools may vary per model) 3.1 A B C D A. Use Upholstery Tool to clean upholstered furniture, draperies, mattresses, clothing, and carpeted stairs. (Tool varies per model) B. Powered Hand Tool may be used for upholstered furniture, draperies, mattresses, clothing, automobile interiors, and carpeted stairs. C. Wand is used to give extra length to your hose. Use it with any of the above tools. D. Crevice Tool may be used in tight spaces, corners and along edges in such places as dresser drawers, upholstered furniture, stairs and baseboards. Removing Hose Attach Wand and Tools 3.2 To remove Hose for tool use, press the Hose Release Button and pull Hose end out. To lock back into place, push Hose into Hose Tube until you hear a click. 3.3 7 To attach tool or wand to hose, push firmly into place. ! WARNING Unplug vacuum before connecting Powered Hand Tool.