Hoover UH70602 Owners Manual - Page 4
Position, tools
View all Hoover UH70602 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
ilU Place nuts in recessed areas on front of handle. Hold each nut in place while tightening each bolt securely with a Phillips screw driver. Place bottom of cup into cleaner. Pivot cup and snap in place. \ Position cord on back of cleaner as shown and press cord into clip. Attach hose Note: Hose must be connected all operations. as shown for Align end of hose with projections (A) over slots (B) in dirt duct. Slide hose into duct (B) and twist hose to lock it into place. Lift hose tube cover (C). Position hose over hose hook (D) and into hose tube (E). Position tools Place smaller unridged end of wand into bottom of rack. Snap wand into clip. Repeat with other wand. Snap ends of dusting brush (A), crevice tool (B) and furniture nozzle (C) into clips as shown. Some models include a long crevice wand (D) instead of the short crevice tool. The crevice wand is packed inside one of the extension wands. Place it inside a wand for storage on the cleaner as well.