Hoover UH70839 Product Manual - Page 23
Warning, Caution, Important
View all Hoover UH70839 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
HEADLIGHT: How to Replace (available on select models only) ! WARNING ! To reduce the risk of electrical shock - Unplug before cleaning or servicing. 4.21 4.22 Removing Lens Press Handle Release Pedal and place handle in low position. 4.21 Using a Phillips screwdriver, remove (2) screws as shown and lift off lens. Installing Bulb 4.22 Pull old bulb straight out of socket. Push new bulb straight into socket until locked in place. Excessive force is not required. Twisting or turning bulb not required. Replacing Lens 4.23 Reposition lens and secure with screws. What to Buy: Headlight Additional bulbs may be ordered at Hoover. com or call 1-800944-9200. Ask for Hoover® Part No. 27313107. 4.23 BELT ! CAUTION ! To reduce the risk of injury from moving parts - Unplug before servicing. 4.24 4.25 The belt is located under the cover of the vacuum and should be checked from time to time to be sure it is in good condition. When To Replace Replace belt if it is stretched, cut or broken. To check the belt, refer to Fig. 4.24 - 4.26. 4.26 4.27 How To Replace 4.24 Depress handle release pedal and place handle in low position. Lay vacuum down in hortizontal position with nozzle facing down as in Fig. 4.14. Remove (4) screws on nozzle lid. 4.25 Pivot off nozzle cover. 4.26 Remove old and worn belt. With lettering on B A outside of belt, slide new belt over motor shaft (metal rod) (A). Push other end of belt through belt guide and slip around area of brushroll without bristles (B). With belt in place, pull and slide brushroll into nozzle making sure that the brushroll end caps are in the What to Buy: Belt Use only genuine HOOVER® belts with your vacuum. Ask for Stretch Belt - HOOVER® part No. 562932001 or AH20080 (2 Belt pack). correct orientation. 4.27 Reposition nozzle plate cover and insert (4) screws. IMPORTANT Rotate brushroll manually to make sure belt is not twisted. LUBRICATION: The motor and brushroll are equipped with bearings which contain sufficient lubrication for their lifetime. The addition of lubricant could cause damage. Do not add lubricant to motor or brushroll. Actual model may vary from images shown. 12