Hoover WH10600 Manual - Page 5
Important - air purifier
UPC - 073502032855
View all Hoover WH10600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
1. SET-UP & HOW TO USE PRODUCT DESCRIPTION 1.1 3 2 1 BACK 4 FRONT CONTROL PANEL 11 7 9 8 a b c 10 d e 6 5 BACK/FRONT 1. Rear Grille 2. Rinsable Pre-Filter 3. Replacement filter made with HEPA Media 4. TiO2 Coated Screen 5. UV Bulb CONTROL PANEL 6. UV Bulb/ TiO2 Coated Screen 7. Ionizer 8. 1 to 24 Hour Timer 9. 3 Speed Control with Auto 10. LCD Display 11. Filter Reset LCD Display Icon a. IONIZER on b. UV/TiO2 on c. Filter made with HEPA Media Replacement Indicator d. Timer (Time Left) e. Running Fan Speed/ IntelliSenseTM Control System* ("A" for Auto Mode) *Setting the unit on AUTO mode (A) will allow the unit to run at the most effective speed based on readings from the air quality monitor. As air conditions change, the air purifier will change its fan speed setting accordingly. This reading will be clearly represented by a change in the background color of the LCD screen. Blue = Good air quality, Amber = Fair air quality, Red =Poor air quality. For proper function, ensure that there is adequate airflow around the product. Set-up - Remove the air purifier from its packaging. IMPORTANT Place the unit on a flat, stable surface with adequate ventilation. - Plug the unit into an AC outlet. - Press the POWER button. - Adjust the Air Cleaning Power with the "+" and "-" buttons. The unit has three Air Cleaning Power settings, and an Auto Mode. - Press the "UV/TiO2" button to toggle on/off. The curved light at the front of the unit will illuminate when the UV/TiO2 mode has been activated. - Press the "ION" button to toggle on/off. The button will illuminate with an amber light when the ION mode has been activated. - Press the TIMER button to set the timer to 1 to 24 hours/OFF (hours indicated with LCD display). 5