Hoover WindTunnel 2 Whole House Rewind Upright Vacuum Product Manual - Page 6
Important
View all Hoover WindTunnel 2 Whole House Rewind Upright Vacuum manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
2. HOW TO USE VACUUM DESCRIPTION 1. Handle 2.1 1 2. Dirt Cup Release Button 3. Carry Handle 4. System Check Indicator 5. Rinsable Filter Access 2 10 6. Dirt Cup 7. Filter made with HEPA media 16 8. Height Adjustment 3 9. Furniture Guard 4 10. Adjustable Dusting Brush 11. Wand 5 11 12. Crevice Tool (inside wand) 13. Cord Rewind Pedal 6 17 18 14. Brushroll ON/OFF Pedal 15. Handle Release Pedal 16. Hose 17. Turbo Tool 7 12 13 18. ON/OFF Switch 19. Hose Release Button 8 14 19 20 20. Hose Connecting Tube 9 15 ON-OFF SWITCH 2.2 A 2.2 Plug cord into electrical outlet. To turn vacuum ON (I=0N), push ON/OFF switch (A) to ON position. To turn vacuum OFF (O=OFF), push switch to OFF position. CORD RELEASE 2.3 2.3 Prior to using, grasp the end of the plug and pull to release the cord from the cord reel until red tape is reached. CARPET HEIGHT ADJUSTMENT* 2.4 C *Number of height settings vary per model. IMPORTANT When pulling on the cord, yellow tape will identify when the cord is almost fully extended. When red tape is visible on the cord, the cord has reached its full length. (Do not pull the cord past the red tape.) 2.4 To adjust height setting, PUSH DOWN and TURN knob (C) to desired height setting. For maximum cleaning performance, the following carpet height settings are recommended: • Hard floor setting: for use on hard floors only. • Low through High settings: Adjust depending on carpet type. • For high pile carpet, use high carpet setting to ease pushing effort. IMPORTANT If the vacuum is difficult to push, push down and turn knob to the next higher setting. Actual model may vary from images shown. 6