Hoover WindTunnel T-Series Max Upright Vacuum Product Manual - Page 8
Caution, Warning
View all Hoover WindTunnel T-Series Max Upright Vacuum manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
REMOVING HOSE When using cleaning tools, place cleaner handle in the upright position. The agitator brushroll will not rotate when the cleaner is in the upright position. 3.2 3.2 To remove Hose for tool use, press the Hose Release Button and pull Hose end out. To lock back into place, push Hose into Hose Tube until you hear a click. ! CAUTION ! To reduce the risk of personal injury from moving parts, unplug vacuum before servicing. ATTACH WAND AND TOOLS (Tools may vary per model) 3.3 Attach tool or wand to the hose (A). 3.3 Attach tool to wand (B) by pushing it firmly onto the wand. A Twist wand or tool slightly to tighten or loosen the connection. To extend wand, twist counter-clockwise to B the unlocked position, extend wand & twist clockwise until tight. Reverse to collapse. ! WARNING ! Unplug vacuum before connecting AirPowered Hand Tool. STAIR CLEANING 3.4 Lift vacuum by Stair Cleaning Handle and position on stairs. Clean forward to back. Never leave the vacuum standing on stairs when not cleaning. 3.5 Use the Hose and Powered Hand Tool (Tool varies per model) for stair cleaning. Always ensure handle is in upright position. 3.4 3.5 ! CAUTION ! Use extra care when cleaning on stairs. To avoid personal injury or damage, and to prevent the cleaner from falling, always place cleaner at bottom of stairs on floor. Do not place cleaner on stairs or furniture, as it may result in injury or damage. When using tools, always ensure handle is in upright position. HOW TO CLEAN TOOLS To clean Hose and Powered Hand Tool, wipe with a damp cloth. DO NOT submerge in water. Other cleaning tools may be washed in warm water with a detergent. Rinse and air dry completely before using. BAG CHECK INDICATOR The indicator (L) will begin to show red as the filter bag fills with dirt. There are three conditions that will cause the indicator to become completely red: 1. If the bag is full; change the bag. 2. If very fine materials have been picked up, clogging the bag pores; change the bag. 3. If there is a blockage in the nozzle, hose, tools or at the bag opening; remove the blockage. 3.6 L Actual model may vary from images shown. 8