Hotpoint HDA3500NWW Use and Care Manual / Warranty - Page 7

Safety Instructions Operating Instructions Operation of models with cycle dial ge.com Rinse Only For rinsing partial loads that will be washed later. Do not use detergent. 1 Make sure HEATED DRY is not selected. 2 Be sure the door is unlatched. 3 Slowly turn the Dial to RINSE ONLY. 4 Latch the door to start the cycle. Plate Warmer or Drying For warming clean dishes and serving plates. This cycle will take approximately 39 minutes. 1 Load clean dishware to be warmed. 2 Select HEATED DRY ON. 3 Be sure the door is unlatched. 4 Slowly turn the Dial to PLATE WARMER or DRYING. 5 Latch the door to start the cycle. Hot Start or Hot Prestart Option Preheats wash water. 1 Select the HOT START or HOT PRESTART cycle and any other option on the push button pad. 2 Be sure the door is unlatched. 3 Slowly turn the Dial to HOT START or HOT PRESTART. 4 Latch the door to start the cycle. Short Wash or Light Wash or Water Saver For quickly washing loads of everyday dishes with light to medium soils that have not dried on. 1 Be sure the door is unlatched. 2 Slowly turn the Dial to SHORT WASH, LIGHT WASH or WATER SAVER. 3 Latch the door to start the cycle. Start Delay (on some models) The START DELAY will allow you to delay the start time of any cycle automatically up to 6 hours. 1 Be sure the door is unlatched. 2 Select the wash cycle and option you want. 3 Slowly turn the Dial to the desired time. The CYCLE ON light will come on. 4 Latch the door to start the cycle. Start (Models with a Dial) Slowly turn the Dial to the START or ON position, or the selected cycle. Don't turn it past the START, ON or cycle position; you could accidentally miss a prewash. There is a time delay between start-up and water fill so you will not hear any wash action right away. I Latch the door to begin the cycle. Troubleshooting Tips Consumer Support 7