Hoveround HOVERLIFT for Vehicles User Manual - Page 17
H, F Left Side, G Right Side
View all Hoveround HOVERLIFT for Vehicles manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
HoverliftManual-RevC 7/8/13 1:01 PM Page 17 Tighten the left tie down strap by turning the knob counterclockwise (see Figure 2F). Tighten the right side by turning the knob clockwise (see Figure 2G). There is a ratcheting mechanism that will hold the tension on the strap when tightened. Figure 2F Left Side Seat back folded down Secure Seat belt over or under seat back Figure 2G Right Side Hook Cable Storage Figure 2H Unplug the power cable and place it in the cable storage tube (see Figure 2H). Ensure the protective rubber gasket is sealed over the tube to prevent water from entering. The seat back must be folded down with the seat belt secured in front of the armrest tubes, either over or under the seat back. This prevents the belt from sliding off during transport and damaging the back of the power wheel chair (see Figure 2H). Make sure all knobs, fasteners and other items are secured tightly in place to keep from losing them during transport. To avoid damage due to inclement weather, always cover your power wheelchair with the cover that was provided with your lift. Check to make sure the chair is properly in place on the platform with the wheels as shown and secured to the lift before driving the vehicle (see Figure 2H). D82012364 REV C 6/17/13 Chapter 2 17