Humax CI-8100PVR User Manual
Humax CI-8100PVR Manual
 |
View all Humax CI-8100PVR manuals
Add to My Manuals
Save this manual to your list of manuals |
Humax CI-8100PVR manual content summary:
- Humax CI-8100PVR | User Manual - Page 1
are trademarks of Dolby Laboratories. This receiver manufactured under license from Dolby Laboratories. ** Thank you for purchasing a HUMAX personal video recorder. Please read this user manual carefully to be able to safely install, use and maintain the receiver at maximum performance. Keep this - Humax CI-8100PVR | User Manual - Page 2
instructions. For your safety, check what the result each action will be. Warnings, Cautions and Notes Throughout the whole manual user to make the user aware of possible problems and information of any importance to help user serviceable parts inside. Refer servicing to qualified service personnel. - Humax CI-8100PVR | User Manual - Page 3
cloth (no solvents) to dust the receiver. ** 5. VENTILATION ** The slots on top of the receiver must be left uncovered to allow proper airflow to that there is adequate ventilation and that you have followed the manufacturer's instructions for mounting. Do not place the product on an unstable cart, - Humax CI-8100PVR | User Manual - Page 4
** When the replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that order. 4. Please do not insert metal or alien substance into the slots for the modules and smart cards. In doing so can cause damage to the STB and reduce its - Humax CI-8100PVR | User Manual - Page 5
Contents ** 1. Before Using the Receiver ** 1.1 Package Contents 1.2 Front Panel 1.3 Rear Panel 1.4 Remote Control 2. Setup ** 2.1 Connecting the Antenna 2.2 Powering On 3. Installation Wizard ** 3.1 Language 3.2 Area Setting 3.3 Antenna Setting 3.4 Automatic Search 3.5 Time Setting 4. Basic - Humax CI-8100PVR | User Manual - Page 6
Programme Guide Information 8.2 Finding a Programme 8.3 Viewing Reserved Programme 9. Setting Preferences 9.1 Parental Control 9.2 Language Setting 9.3 Time Setting 9.4 Schedule 9.5 A/V Control 9.6 UHF 9.7 Miscellaneous 10. Installation 10.1 Antenna Setting 10.2 Automatic Search 10.3 Manual Search - Humax CI-8100PVR | User Manual - Page 7
11. Software Upgrade 11.1 OTA (Over the Air) 11.2 S/W Upgrade from PC 12. System Information 12.1 Status 12.2 Signal Detection 12.3 Common Interface 13. Games ** 14. Menu Map ** 15. Trouble Shooting 15.1 Trouble Shooting 15.2 Error Message 16. Specification 17. Glossary 18. Service and Support GB74 - Humax CI-8100PVR | User Manual - Page 8
- Humax CI-8100PVR | User Manual - Page 9
in the remote controller. ** Warning: To install a hard disk drive, contact your product provider. The company shall not be liable for problems caused by installing a hard disk drive by user. This product provides best performance with Seagate ST340020ACE (40GB), ST360020ACE (60GB),or ST380020ACE - Humax CI-8100PVR | User Manual - Page 10
- Humax CI-8100PVR | User Manual - Page 11
Connect other digital satellite receiver. ** 2. LNB IN ** Connects a satellite antenna cable. ** 3. RS-232C ** Connects to your PC to upgrade product's software programme. ** 4. TV SCART ** Connects a TV SCART cable. ** 5. VCR SCART ** Connects a VCR SCART cable. ** 6. VIDEO ** Connects to your TV - Humax CI-8100PVR | User Manual - Page 12
6. ARROW BUTTONS 2. TV/RADIO 7. OPT+ (OPTION) 3. NUMERICAL BUTTONS 8. SOUNDTRACK 4. LIST 9. CH-/CH+ and PAGE-/PAGE+ 5. BACK 10. MENU 11. PLAYBACK CONTROL BUTTONS 12. STANDBY 13. GUIDE 14. EXIT 15. OK 16. G (Game) 17. SUBTITLE 18. V-/V+ 19. i (INFORMATION) 20. MUTE GB 12 - Humax CI-8100PVR | User Manual - Page 13
fast forward, record, stop, pause buttons. ** 12. STANDBY ** Switches between Operation and Standby modes. ** 13. GUIDE ** Displays the Programme Guide. ** 14. EXIT ** Exits the main menu or Guide screen. ** 15. OK ** Selects a menu, or confirms the selected operation. And displays the channel list - Humax CI-8100PVR | User Manual - Page 14
chapter describes how to set up the receiver. Select the most appropriate procedure depending on your requirements. Note: If you encounter any problem when setting up the receiver, please contact your local product distributor. 2.1 Connecting the Antenna 1. Connecting TV and VCR This is the most - Humax CI-8100PVR | User Manual - Page 15
** ** 3. Connecting Hi-Fi system 2 ** If you wish to connect S/PDIFthe optical S/PDIF terminal and Dolby digital decoder to listen digital audio, connect as following. ** 2.2 Powering On ** 1. Connect the power cord of the receiver to a wall outlet. 2. Turn on the power button, located at the left - Humax CI-8100PVR | User Manual - Page 16
3. Installation Wizard ** When powering on your receiver for the first time after purchasing, the Installation Wizard is automatically started. You can easily set-up using simple organisation and options, and watch the broadcasting after completing the set-up procedure. You can select items using - Humax CI-8100PVR | User Manual - Page 17
you cannot find the LNB Frequency value from the list, select User Define, manually enter the frequency using the NUMERICAL (0~9) button, and then press the OK button up. • If you encounter any problems or questions when setting up the antenna, please contact your local product installer or distributor. - Humax CI-8100PVR | User Manual - Page 18
3. Installation Wizard ** 3.4 Automatic Search You can automatically search for satellites according to the Antenna Setting. Please wait for finishing the Automatic Search. If you want to stop the Automatic Search, select the OK button. If the Automatic Search is stopped or finished, the selected - Humax CI-8100PVR | User Manual - Page 19
to the channel directly. 3. Press the TV/RADIO button to switch between TV channel and Radio channel. Note: You can switch channel using Programme Guide or Channel List. Please refer to Chapter 5 and 6 for more information. 4.2 Volume Control 1. Press the V-/V+ buttons to adjust the audio volume - Humax CI-8100PVR | User Manual - Page 20
4. Basic Operation ** 4.4 Change a Audio Language If the current programme is available in multiple audio languages, you can select the language that you wish to listen in. 1. Press the SOUNDTRACK button to display soundtrack list. 2. Select your desired audio language using the change Audio - Humax CI-8100PVR | User Manual - Page 21
** ** 1. Channel number and channel name 2. Programme name 3. Icons Displayed only if this programme is recording. Displayed only if this programme is reserved. Represents parental level. It indicates the minimum level of ages that the programme is targeted at. Displayed only when the channel is a - Humax CI-8100PVR | User Manual - Page 22
4. Basic Operation ** 2. Detail Programme Information You can see detailed information about the current programme. Press the i displayed to view detailed information. Note: • Press the i button again to hide the information box. • If the Detail information is more than one page, use to move to - Humax CI-8100PVR | User Manual - Page 23
** ** 2. Lock/Unlock a Channel You can lock or unlock the current channel while watching a programme. 1. Press the OPT+ button. 2. Select Lock using the button. button, and press the OK or 3. Select Lock option using the button. button, and press the OK 4. Select Unlock option using the - Humax CI-8100PVR | User Manual - Page 24
: Transponder Information for the channel (Frequency, Polarisation, Symbol rate, FEC) 4th Line : Video PID, Audio PID ,PCR PID (Packet Identification) 5th Line : Network ID (NID), Service ID (SID) GB 24 - Humax CI-8100PVR | User Manual - Page 25
5. Time Shifted Recording ** This unit automatically saves the programme on air so that users can watch programmes as they watch a video tape using functions such as rewind, fast forward, replay and pause. 5.1 Time Bar If you press playback control buttons while watching TV, the Time bar appears on - Humax CI-8100PVR | User Manual - Page 26
5. Time Shifted Recording ** 5.3 Rewind to Previous Scene Press the REWIND button on the remote controller to watch the scene passed by. Whenever you press the REWIND button, the rewind speed increases by 3 steps. If you press the PLAY button, the rewinding operation stops, and the programme - Humax CI-8100PVR | User Manual - Page 27
** ** 5.6 Additional Time Shift Operations Using Time Bar You can perform additional time shift operations using the 5 operation buttons on the right side of the time bar. 1. Slow Motion Select SLOW MOTION ) and then press the OK button to play the current programme in slow motion. Press the - Humax CI-8100PVR | User Manual - Page 28
your desired programme automatically. You can reserve recording of a programme using Menu-Record-Recording Schedule and Guide. For detailed information on recording reservation using Guide, refer to Chapter 8. 1. Press the MENU button. 2. Select Record using the button. button and press the - Humax CI-8100PVR | User Manual - Page 29
** ** 1. Adding Recording Reservations 1. Enter the Channel Number using the NUMERICAL (0~9) buttons. The channel name changes automatically according to the input channel number 2. Enter the Recording Start Time using the NUMERICAL (0~9) buttons. button, and 3. Enter the Recording End Time - Humax CI-8100PVR | User Manual - Page 30
6. Recording and Playback ** 6.3 Programme Playback Select your desired programme from the recorded programme list, and then press the PLAY playback the recorded programme. button to playback the recorded programme. button to You can view the programme list recorded by instant recording or - Humax CI-8100PVR | User Manual - Page 31
** ** 1. Deleting a Recorded Programme Select Delete in the edit screen, and then press the OK button. 2. Changing The Name of a Recorded Programme 1. Select Programme in the edit screen, and then press the OK button to display a keyboard on the screen. 2. Enter the desired programme name on - Humax CI-8100PVR | User Manual - Page 32
6. Recording and Playback ** 6.5 Checking Hard Disk Drive You can check the free space of the hard disk drive, and can format the disk drive if necessary. 1. Press the MENU button. 2. Select Record using the button. button, and press the OK or 3. Select HDD Control using the or button. button - Humax CI-8100PVR | User Manual - Page 33
7. Channel List ** 5 types of channel lists are provided for easy and quick channel searching. TV The list of all TV channels with 2 sub-groups: one is sorted by channel number, the other is sorted by channel name. Radio The list of all Radio channels with 2 sub-groups: one is sorted by channel - Humax CI-8100PVR | User Manual - Page 34
7. Channel List ** 7.2 Changing Channel List Group You can select channel list by group 1. Press the button while the channel list is displayed to view the group list. 2. Select your desired channel group using the display its sub-groups. button to 3. Press the OK or button, select your - Humax CI-8100PVR | User Manual - Page 35
** ** 4. You will be prompted to enter your password. Enter your password using NUMERICAL (0~9) buttons. Note: • Press the BACK or button to save the changes and return to the previous menu, press the MENU or EXIT button to exit the menu screen. • You can easily navigate all menus using the assigned - Humax CI-8100PVR | User Manual - Page 36
7. Channel List ** 3. Lock/Unlock Channels You can lock or unlock one or more channels. 1. Move the cursor to the channel list using the button. 2. Select your desired channel, and then press the OK button to lock/unlock the channel(s). You can select multiple channels. 3. Select Lock in the right - Humax CI-8100PVR | User Manual - Page 37
** ** 5. Rename a Channel You can change the channel name as you like. 1. Move the cursor to the channel list using the button. 2. Select your desired channel, and then press the OK You can select only a single channel button. 3. Select Rename in the right using the button, and then press the - Humax CI-8100PVR | User Manual - Page 38
7. Channel List ** Note: • Press the BACK or button to save the changes and return to the previous menu. Press the MENU or EXIT button to exit the Menu screen. • You can easily navigate all menu items using the assigned NUMERICAL (0~9) buttons for each menu. Press the MENU - 2 - 2 in order on the - Humax CI-8100PVR | User Manual - Page 39
** ** 2. Move favourite channels You can move favourite channel(s) to your desired location within the Favourite channel list. 1. Select Favourite Group using . 2. Select your desired channel to move within the Favourite channel list and press the OK button. 3. Select , and press the OK button. - Humax CI-8100PVR | User Manual - Page 40
7. Channel List ** Note: You can also change into TV or Radio channel by pressing TV/RADIO controller. Select a favourite channel list You can select your desired Favourite channel list to edit. Press to display the Favourite channel list. Then select your desired channel list using the button, - Humax CI-8100PVR | User Manual - Page 41
the date and time.You can also schedule your watching using the information given. 8.1 Viewing Programme Guide Information You can view programme information for all channels. 1. Press the GUIDE button. 2. Move to previous or next programme within the same channel using the button. 3. Move to - Humax CI-8100PVR | User Manual - Page 42
. Day Moves to one day before. Day Moves to one day after. 5. Select and press the OK button to exit the Time Bar. Note: Guide provides programme information from the previous day to the next 7 days. 3. Reserving a Recording You can automatically reserve your desired programme by selecting the - Humax CI-8100PVR | User Manual - Page 43
** ** 8.2 Finding a Programme You can find your desired programme by programme name or genre easily. 1. Press the GUIDE button. 2. Press the Blue button to display Find screen. 3. Enter the programme name directly using the keyboard displayed on the screen. Note: If you select - Humax CI-8100PVR | User Manual - Page 44
** 8.3 Viewing Reserved Programme You can add or edit watching-reserved programme by schedule screen. 1. Press the GUIDE button. 2. Press the Yellow button to display the Schedule screen. 3. Select the reserved programme and press the OK edit the reservation information. button to 4. Select - Humax CI-8100PVR | User Manual - Page 45
** ** 2. Adding Reservation 1. Enter your desired channel number using the NUMERICAL (0~9) buttons. The channel name is automatically displayed by channel number. 2. Enter your desired Start Time using the NUMERICAL (0~9) buttons. button and the 3. Enter your desired End Time using the - Humax CI-8100PVR | User Manual - Page 46
9. Setting Preferences ** You can set censorship, watching time, and all other items suitable for your environment. Note: • Press the BACK or button to save the changes and return to the previous menu. Press the MENU or EXIT button to exit the Menu screen. • You can easily select all menu items - Humax CI-8100PVR | User Manual - Page 47
** ** View All All programmes can be watched because there is no age limitation. 7 Programmes are blocked under the age of 7. 12 Programmes are blocked under the age of 12. 15 Programmes are blocked under the age of 15. 18 Programmes are blocked under the age of 18. Lock All All Programmes - Humax CI-8100PVR | User Manual - Page 48
9. Setting Preferences ** 3. Change Password You can select whether or not to display the Subtitle automatically if provided. 1. Select Change Password using the OK or button. button, and press the 2. Enter the New Password again to confirm the Verify Password, and press the OK button. 3. - Humax CI-8100PVR | User Manual - Page 49
2. Select your desired option and press the or OK button. ** Auto Subtitles are displayed automatically in the predefined subtitle language. Manual Subtitles are displayed in the language when you select the subtitle language by pressing the SUBTITLE button at remote controller. 4. Subtitle Font - Humax CI-8100PVR | User Manual - Page 50
9. Setting Preferences ** 1. Setting Current Time You can set the GMT Offset for current time. 1. Select GMT Offset using the button. 2. Press the OK or button to display GMT list. GMT is changed by from 30 minutes to 1 hour. 3. Select your GMT offset using the button. buttons, and press the - Humax CI-8100PVR | User Manual - Page 51
, select a blank list and press the OK button. Note: • For detailed information about how to edit or add a reservation, refer to Ch6 Programme Guide. • This menu is enabled only for the product without hard disk drive. 9.5 A/V Control You can set Audio or Video Output Control. 1. Press the - Humax CI-8100PVR | User Manual - Page 52
NTSC. 1. Select TV Standard using the button, and press the OK or button 2. Select one option among Auto/PAL/NTSC using the ** AUTO The TV supports both PAL and NTSC. button, and press the OK PAL The TV - Humax CI-8100PVR | User Manual - Page 53
** ** 6. NTSC Mode If TV Standard is set to NTSC, set the following mode. 1. Select NTSC Mode using the button. 2. Select one option from 3.58/4.43 using the or OK button. 7. Audio Output Set the Audio Output. 1. Select Audio Output using the button. 2. Select one option form Stereo or - Humax CI-8100PVR | User Manual - Page 54
9. Setting Preferences ** 2. PAL You can select the PAL standard. 1. Select PAL using the button, and press the OK or button. 2. Select one option among PAL I/PAL G/PAL B/PAL D/PAL K using the OK button. button, and press the 3. Offset You can adjust fine tuning setting. 1. Select Offset - Humax CI-8100PVR | User Manual - Page 55
** ** 1. i-Plate Display Time You can set the duration during which the Information box is to be displayed when you switch the channel. 1. Select i-Plate Display Time using the button, and press the OK or button. 2. Select a value between 0 ~ 20 seconds using the button, and press the OK - Humax CI-8100PVR | User Manual - Page 56
to enter Antenna Setting. Note: If no satellite is registered from Antenna Setting menu, Channel Search such as Automatic Search, Manual Search, Multiple Manual Search, Advanced Search is not available. ** Satellite You can select satellite for Channel Search. 1. Select Satellite using the button - Humax CI-8100PVR | User Manual - Page 57
** ** Satellite Alternative You can search and watch a programme by using the antenna headed for the selected satellite. 1. Select Satellite Alternative using the the OK or button. button, and press 2. Then, you can change into one of the following options. ** Disable Does not search the selected - Humax CI-8100PVR | User Manual - Page 58
10. Installation ** DiSEqC Input You can select DiSEqC switch. 1. Select DiSEqC Input using the button, and press the OK or button. Select the DiSEqC Swtich using the button, and press the OK button. You can select one option among Tone burst A~B, DiSEqC A~D, DiSEqC A~D for 2.0 and Disable. - Humax CI-8100PVR | User Manual - Page 59
** ** 10.2 Automatic Search If you select the satellite to search channel according to the Antenna Setting, you can automatically search the satellite without entering any other information. And you cannot watch any programme without searching channel. 1. Select MENU button. 2. Select - Humax CI-8100PVR | User Manual - Page 60
10. Installation ** Channel Type You can search by TV or Radio channel. 1. Select Channel Type using the or button. button, and press the OK 2. Select one option among All, TV and Radio using the button. ** All Searches all channels. TV Search only TV channels. Radio Searches only Radio - Humax CI-8100PVR | User Manual - Page 61
** ** 10.3 Manual Search You can search channels of the selected satellites by transponders if you know the Transponder information. 1. Satellite Selects a satellite to search from the satellites - Humax CI-8100PVR | User Manual - Page 62
10. Installation ** Note: • For channel transponder information, you can find your desired information from Satellite channel magazine, Satellite channel related home pages, news release and home page of broadcasting company, etc. • If you have correctly completed setting the Transponder information - Humax CI-8100PVR | User Manual - Page 63
Radio Searches only Radio Channel. 6. Search You can complete the setting and start searching. 1. Select Search and press the OK button to start Manual Search. 2. The next proceodures are the same as those of Automatic Search. Please refer to Automatic Search. 10.4 Other Search You can directly - Humax CI-8100PVR | User Manual - Page 64
to start Advanced Search. ** Satellite, Transponder The setting for satellite and transponder is the same as that of Manual Search. Refer to the satellite and transponder setting for Manual Search. ** Video PID, Audio PID, PCR PID You can enter the PID value for specific channel. 1. Select the - Humax CI-8100PVR | User Manual - Page 65
** ** 2. SMATV Search If your receiver uses the antenna for common use, operate SMATV Search. For SMATV Search, Channel Search is performed by the antenna for common use regardless of the setting value in Antenna Setting. Select SMATV Search in Other Search Menu using the button, and press the - Humax CI-8100PVR | User Manual - Page 66
. Please refer to Automatic Search. 3. Multiple Manual Search If you wish to search multiple transponder at the same time, you can run Multiple Menu using the button, press the OK or button to enable the Multiple Manual Search. 2. Select one option among Satellite, Edit TP List, Scrambled Type - Humax CI-8100PVR | User Manual - Page 67
** ** Edit TP List You can edit TP list to search at a time and change the setting for Transponder. 1. Select Edit TP List from Multiple Manual Search, and press the OK or button. 2. Select Add and press the OK Transponder data. button to add a new 3. Select a specific transponder from the - Humax CI-8100PVR | User Manual - Page 68
10. Installation ** 1. Motor Type You should set the Motor Type before Motor Antenna Setting. 1. Select Motor Type from Motor Antenna, and press the OK or button. 2. Set LNB Frequency. ** • Select LNB Frequency using the OK or button. button, and press the • Select one value among LNB - Humax CI-8100PVR | User Manual - Page 69
** ** 2. Edit Satellite Data You can set the position of the Satellite, which the Motor Antenna heads for, and decide whether or not to use the satellite. 1. Select Edit Satellite Data from Motor Antenna Menu using the button. 2. Move to Edit Satellite Data by pressing the OK button. 3. Select - Humax CI-8100PVR | User Manual - Page 70
10. Installation ** 3. Motor Setting You can set Motor Antenna for Channel Search and watching. 1. Select Motor Setting from Motor Antenna using the button, and press the OK or button. 2. Select Satellite. ** • Select Satellite using the or button. button, and press the OK • Select the - Humax CI-8100PVR | User Manual - Page 71
** ** 6. Confirm Signal Strength and Quality Level and fine-tune the Antenna direction. ** • Select Go to Stored Position using the button. • Move the Antenna to East/West by pressing Adjust Signal Level to maximum. button. 7. Save the adjusted position of Satellite. ** • Select Store - Humax CI-8100PVR | User Manual - Page 72
10. Installation ** 4. Installer Menu You can set default setting and operation limit for Motor Antenna. 1. Select Installer Menu from Motor Antenna Menu using the button. 2. Press the OK button to move to Installer Menu. ** Motor Limit Setting ** You can set the maximum Motor Limit both East - Humax CI-8100PVR | User Manual - Page 73
** ** Reset Position ** You can restore the position saved at Motor Antenna to the default setting. 1. Select Reset Positions using the button. 2. Press the OK button. 3. Select Yes and press the OK button to restore all saved value at Motor Antenna to the default setting. 4. Please wait during - Humax CI-8100PVR | User Manual - Page 74
, the equipment may not be updated or work after software update. 2. The manufacturer decides to release software downloading via a designated antenna system 3. The equipment must be tuned properly to the same antenna that the manufacturer uses. 4. Upgrade software when the quality of receiving - Humax CI-8100PVR | User Manual - Page 75
1. A message will be displayed to notify that new software is found. 2. Select Yes and press the OK button to update the software. 3. Starts downloading new software. Please wait until the updated is completed. 4. When completing the software update, the equipment is automatically powered off and on - Humax CI-8100PVR | User Manual - Page 76
11. Software Upgrade ** If using Automatic Update ** You can set the product to find HUMAX software update site and update software automatically. 1. Select Automatic Update from Software Update screen using the button, and press the OK or button. 2. Automatically search for new software. 3. - Humax CI-8100PVR | User Manual - Page 77
** ** Manual Update You can perform Manual Update only if you know which satellite has new software and the Transponder information correctly. 1. Select Manual Update from Software Update screen using the button, and press the OK or button. Select the the Satellite which provides update software. - Humax CI-8100PVR | User Manual - Page 78
11. Software Upgrade ** 11.2 Software Update from PC You can connect your receiver to the PC directly and upgrade your software by transferring the new software from the PC. Follow these steps to download new software from PC to this product. 1. Download new software file (HDF files) equivalent for - Humax CI-8100PVR | User Manual - Page 79
can view System information 1. Select Status using the button. button, and press the OK or 2. Confirm the information about Hardware version, Software version, Loader version, System ID, Slot1, 2. 12.2 Signal Detection You can view the signal strength and signal quality receiving from satellite - Humax CI-8100PVR | User Manual - Page 80
12. System Information ** 12.3 Common Interface You can view the current status of CI module. 1. Select Common Interface using the OK or . button, and press the 2. Select each Slot using the or button. button, and press the OK 3. If Common Interface is available, you can view information - Humax CI-8100PVR | User Manual - Page 81
13. Games ** This product provides various games for user's entertainment. 1. Press the GAME button. 2. According to the instruction displayed on screen, you can enjoy the game using button. ** Note: • Press the EXIT or BACK button to exit the game. and OK GB 81 - Humax CI-8100PVR | User Manual - Page 82
14. Menu Map ** GB 82 - Humax CI-8100PVR | User Manual - Page 83
service, please make sure following instructions. If the product does not work normally after completing the following trouble shooting, please contact your local product distributor or service Smart Card is plugged in. - Check the correct smart card is plugged in, and correctly plug the smart - Humax CI-8100PVR | User Manual - Page 84
if the channel has Audio. CI module is not installed. CI module is not correctly inserted. Install CI module. Reinstall CI module. CI module is not recognized. Install other CI module to check if the exiting CI module has problem. If the existing CI has no problem, contact local distributor of - Humax CI-8100PVR | User Manual - Page 85
16. Specification ** Tuner & Channel Input Connector Frequency Range Signal Level LNB Power & Polarisation 22kHz Tone DiSEqC Control Demodulation Input Symbol Rate FEC mode MPEG Transport Stream A/V Decoding Transport Stream Profile Level Video Input Rate Aspect Ratio Video Resolution Audio Decoding - Humax CI-8100PVR | User Manual - Page 86
16. Specification ** RF Modulator RF Input/Loopthrough output Frequency Output Channel TV Standard A/V and Data In/Out Video Audio R/L S/PDIF RS-232C Power Supply Input Voltage Type Power Consumption - Humax CI-8100PVR | User Manual - Page 87
Programme Guide (Electronic Programme Guide, EPG) A electronic program guide (EPG) , which you can view without additional payments to a service provider. ** Hi-Fi (High Fidelity) The characteristics ** OTA (Over The Air) Means that software downloads where the manufacturer reserves the right to - Humax CI-8100PVR | User Manual - Page 88
18. Service and Support ** You can get information such as a troubleshooting guide, software upgrades and product support guide from the following web sites and call center (Hotline). Please try to contact to your local dealers first when you have any problem. Web site and e-mail Homepage http:// - Humax CI-8100PVR | User Manual - Page 89
Friday) E-mail: [email protected] Open: Local Time in Dubai (GMT+4) 9:00 - 20:00 (Saturday - Thursday, close on Friday) Support Language: English/Arabic ** Humax Hotline (Germany) Germany: 01805 778 870 ( 0,12/Min) Other Countries: + 49 1805 778 870 ( 0,12/Min+ International Call Charge