Humax F2-1000T User Manual
Humax F2-1000T Manual
 |
View all Humax F2-1000T manuals
Add to My Manuals
Save this manual to your list of manuals |
Humax F2-1000T manual content summary:
- Humax F2-1000T | User Manual - Page 1
under license from Dolby Laboratories. ** Thank you for purchasing a HUMAX digital terrestrial receiver. Please read this user manual carefully, to be able to safely install, use and maintain the receiver at maximum performance. Keep this user manual next to your receiver for future reference. GB 1 - Humax F2-1000T | User Manual - Page 2
cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. ** This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury. ** This symbol indicates important instructions accompanying the product. GB 2 - Humax F2-1000T | User Manual - Page 3
Safety and Warning ** This digital terrestrial receiver has been manufactured to satisfy international safety standards. Please read the following safety precautions carefully. ** Safety Instructions and Precautions ** 1. MAINS SUPPLY ** AC 100 ~ 240V 50/60Hz Max 1.0A Operate your product only from - Humax F2-1000T | User Manual - Page 4
** Place the receiver indoors to avoid there is adequate ventilation and that you have followed the manufacturer's instructions for mounting. Do not place the product on an unstable cart, replacement parts are required, be sure the service technician uses replacement parts specified by the - Humax F2-1000T | User Manual - Page 5
Contents ** 1. Before Using the Receiver 1.1 Package Contents 1.2 Front Panel 1.3 Rear Panel 1.4 Remote Control 2. Setup 2.1 Connecting Edit Favourite Channels 5.5 Channel Change Mode 6. Programme Guide 6.1 Viewing Programme Guide Information 6.2 Finding a Programme 6.3 Viewing Reserved Programme - Humax F2-1000T | User Manual - Page 6
Power 9. Software Update 9.1 OTA (Over the Air) 10. System Information 10.1 Status 10.2 Signal Detection 11. Manipulating your TV using Remote Control 12. Menu Map 13. Trouble Shooting 13.1 Trouble Shooting 13.2 Error Message 14. Specification 15. Glossary 16. Service and Support GB34 ** GB34 - Humax F2-1000T | User Manual - Page 7
1.Before Using the Receiver ** This chapter describes detail instructions on the product and its accessories. 1.1 Package Contents Please check all package contents before using your receiver. ** ** Remote Control (1) ** User's Manual (1) Batteries (2) RF Cable (1) Adaptor (1) ** Note: Since - Humax F2-1000T | User Manual - Page 8
1. Before Using the Receiver ** 1.2 Front Panel ** 1. STANDBY LED ** Red light is displayed when the product is in the Standby mode. Green light is displayed when the product is in operation. GB 8 - Humax F2-1000T | User Manual - Page 9
** ** 1.3 Rear Panel ** 1. ANTENNA IN ** Connects a aerial to a ANTENNA input jack on the your receiver. ** 2. TV / VCR ** Connects a RF signal from your receiver to RF (ANT) input jack on your TV or VCR. ** 3. TV SCART ** Connects a TV SCART cable. 4. AC Adaptor GB 9 - Humax F2-1000T | User Manual - Page 10
1. Before Using the Receiver ** 1.4 Remote Control ** GB 10 - Humax F2-1000T | User Manual - Page 11
** ** 1. DTV ** Controls the Receiver. ** 2. TV ** Controls the TV. modes. ** 13.GUIDE ** Displays the Programme Guide. ** 14.EXIT ** Exits the main menu or Guide screen. ** 15.OK ** Note: This remote control can also control your TV. To set the remote control for your TV, please refer to Chapter - Humax F2-1000T | User Manual - Page 12
2. Setup ** This chapter describes how to set up the receiver. Select the most appropriate procedure depending on your case. Note: If you encounter any problem when setting up the receiver, please contact your local product distributor. 2.1 Connecting Aerial • Connect the cable of your TV aerial to - Humax F2-1000T | User Manual - Page 13
** ** -Active Antenna- ** Warning: Make sure to set Installation -Antenna Power to On before connecting to the antenna when active antenna is used. Refer to Chapter 8.4 for more information. GB 13 - Humax F2-1000T | User Manual - Page 14
with your product. When you are not using this product, disconnect the adapter from the wall outlet. ** ** 2. Power on by pressing the STANDBY button at Remote Controller. The Standby LED indicator is turned on Green. ** GB 14 - Humax F2-1000T | User Manual - Page 15
3. Installation Wizard ** When powering on your receiver for the first time after purchasing, the Installation Wizard is automatically started. It immediately performs watch any broadcasting normally. In this case, you can use the Installation Menu to configure your receiver as you like. GB 15 - Humax F2-1000T | User Manual - Page 16
TV channel and Radio channel. Note: You can switch channel using Programme Guide or Channel List. Please refer to Chapter 5 and 6 for more information of your TV temporarily. 4.3 Motion Still Press the FREEZE button at remote control to pause the current programme. Press the FREEZE button again - Humax F2-1000T | User Manual - Page 17
** ** 4.5 Change a Audio Language If the current programme is available in multiple audio languages, you can select the language that you wish to listen in. 1. Press the SOUNDTRACK soundtrack list. button to display 2. Select your desired audio language using the to change Audio immediately. - Humax F2-1000T | User Manual - Page 18
programme information. Note: If there is no available programme information, programme information is not displayed. Dolby Digital doesn't be supported by this receiver. 2.Detail Programme Information You can see detailed information about the current programme. Press the i button where I-plate is - Humax F2-1000T | User Manual - Page 19
** ** 4.7 Option List You can view and confirm detailed information about the current channel and change the information in necessary. Note: Press the OPT+ button when the channel list is displayed to view Option List. Then the following functions in the option list are performed to the current - Humax F2-1000T | User Manual - Page 20
4. Basic Operation ** 2. Lock/Unlock a Channel You can lock or unlock the current channel while watching a programme. 1. Press the OPT+ button. 2. Select Lock using the button. button, and press the or OK 3. Select Lock option using the OK button. button, and press the 4. Select Unlock - Humax F2-1000T | User Manual - Page 21
5. Channel List ** 3 types of channel lists are provided for easy and quick channel searching. TV Radio Favourite The list of all TV channels with 2 sub-groups: one is sorted by channel number, the other is sorted by channel name. The list of all Radio channels with 2 sub-groups: one is sorted by - Humax F2-1000T | User Manual - Page 22
button to exit the menu screen. • You can easily navigate all menus using the assigned numeric for each menu. Press the MENU - 2 - 1 in order at remote control to select Edit Channel Lists menu. GB 22 - Humax F2-1000T | User Manual - Page 23
** ** 1. Select a Channel Group5 You can select the channel list group to edit. TV and Radio sub-groups can be selected. 1. Press the OK List Group. or button in group to display Channel 2. Select your desired Channel List Group using the button, and press the OK button. Note: • Press the TV/ - Humax F2-1000T | User Manual - Page 24
the Menu screen. • You can easily navigate all menu items using the assigned numerical button for each menu. Press the MENU - 2 - 2 in order on the remote controller to select the Edit Favourite Channels menu. GB 24 - Humax F2-1000T | User Manual - Page 25
Favourite channel list, and press to remove Favourite channel(s). ** Note: You can switch between TV and Radio channel list using TV/RADIO button or at remote control. ** GB 25 - Humax F2-1000T | User Manual - Page 26
5. Channel List ** 2. Move favourite channels You can move favourite channel(s) to your desired location within the Favourite channel list. 1. Select Favourite Group using . 2. Select your desired channel to move within the Favourite channel list and press the OK button. 3. Select , and press the OK - Humax F2-1000T | User Manual - Page 27
channels. ** Note: You can also change into TV or Radio channel by pressing TV/RADIO controller. ** Select a favourite channel list button at remote You can select your desired Favourite channel list to edit. Press to display the Favourite channel list. Then select your desired channel list - Humax F2-1000T | User Manual - Page 28
5. Channel List ** 5.5 Channel Change Mode You can change the channel either in the group or in the entire groups while watching a programme. 1. Press the MENU button. 2. Select Channel Looping Mode using the and press the OK or button. button, 3. Select All Channels or Within the Current - Humax F2-1000T | User Manual - Page 29
6.1 Viewing Programme Guide Information You can view programme information for all channels. 1. Press the GUIDE button. 2. Move can enter your desired channel number using the NUMERICAL (0-9) button on the remote controller to move to the channel directly. 4. Select your desired programme, - Humax F2-1000T | User Manual - Page 30
Day Moves to one day before. Moves to one day after. 5. Select button and press the OK button to exit the Time Bar. Note: Guide provides programme information from the previous day to the next 7 days. ** 3. Reserving (Reserving a Watching) You can automatically reserve your desired programme by - Humax F2-1000T | User Manual - Page 31
** ** 6.2 Finding a Programme You can find your desired programme by programme name or genre easily. 1. Press the GUIDE button. 2. Press the Blue button to display Find screen. 3. Enter the programme name directly using the keyboard displayed on the screen. ** 4. When completing entering - Humax F2-1000T | User Manual - Page 32
** 6.3 Viewing Reserved Programme You can add or edit reserved programmes by viewing the reserved programme list. 1. Press the GUIDE button. 2. Press the Yellow button to display the Schedule screen. 3. Select the scheduled programme and press the OK button to edit the reservation information - Humax F2-1000T | User Manual - Page 33
** ** 2. Adding a Reservation 1. Enter your desired channel number using the NUMERICAL (0-9) button. The channel name is automatically displayed by channel number. 2. Enter your desired Start Time using the the NUMERICAL (0-9) button. button and 3. Enter your desired End Time using the - Humax F2-1000T | User Manual - Page 34
7. Setting Preferences ** You can set censorship, watching time, and all other items suitable for your environment. Note: • Press the BACK or button to save the changes and return to the previous menu. Press the MENU or EXIT button to exit the Menu screen. • You can easily select any item from the - Humax F2-1000T | User Manual - Page 35
** ** View All 7 12 15 18 Lock All All programmes can be watched because there is no age limitation. Programmes are blocked for children under the age of 7. Programmes are blocked for children under the age of 12. Programmes are blocked for children under the age of 15. Programmes are blocked for - Humax F2-1000T | User Manual - Page 36
7. Setting Preferences ** 3. Change Password You can change the existing Password into new one. 1. Select Change Password using the press the or OK button. button, and 2. Enter New Password using the NUMERICAL (0-9)button, and press OK button. 3. Enter the New Password again to confirm the - Humax F2-1000T | User Manual - Page 37
OK button. ** Auto Subtitles are displayed automatically in the predefined subtitle language. Manual Subtitles are displayed in the language when you select the subtitle language by pressing the Subtitle button at remote control. 3. Subtitle Font ** You can select the Subtitle font. 1. Select - Humax F2-1000T | User Manual - Page 38
7. Setting Preferences ** 1.Setting Current Time You can set the GMT Offset for current time. 1. Select GMT Offset using the button. 2. Press the or OK button to display GMT list. sssGMT is changed by from 30 minutes to 1 hour. 3. Select your GMT offset using the the OK button. buttons, and - Humax F2-1000T | User Manual - Page 39
** ** 3. Power Off You can set the time when the product is automatically powered off. 1. Select Power Off using the button, and press the or OK button. 2. Select either Enable or Disable the Power Off using the button. ** Enable Uses the Power Off and sets the Power Off time. Disable Not uses - Humax F2-1000T | User Manual - Page 40
7. Setting Preferences ** 1. TV-SCART You can set TV SCART Output. 1. Select TV-SCART button, and press the OK or button. 2. Select one option among CVBS/RGB using the button. button, and press the OK or 2. Audio Output Set the Audio Output. 1. Select Audio Output button, and press the OK - Humax F2-1000T | User Manual - Page 41
** ** 7.6 UHF Tuning You can set the UHF channel. 1. Press the MENU button. 2. Select Preferences using the OK or button. 3. Select UHF Tuning using the OK or button. button, and press the button, and press the 1. UHF Channel You can select UHF Channels for the TV. The Channel range and Frequency - Humax F2-1000T | User Manual - Page 42
7. Setting Preferences ** 7.7 Miscellaneous Settings 1. Press the MENU button. 2. Select Preferences using the OK or button. button, and press the 3. Select Miscellaneous Settings using the and press the OK or button. button, 1. i-Plate Display Time You can set the duration during which the - Humax F2-1000T | User Manual - Page 43
press the OK or button. 4. Receiver starts to search channels automatically. ** Search Wait while the receiver searches for the channels, this may the channel does not exist, press the OK button and try to reset the search operation again if necessary. 3. You can delete unnecessary channels - Humax F2-1000T | User Manual - Page 44
Search You can search channels manually by searching parameters, if you know the MUX information. 1. Channel Number Enter your desired frequency channel to search. When entering frequency channel value, the appropriate - Humax F2-1000T | User Manual - Page 45
Disable using the button. 8.3 Default Setting Default Setting restores the receiver to the default settings. Warning: Please note that once you perform Default Setting, all data such as Channel List, and User Configured data are deleted. To perform Factory Default: 1. Press the - Humax F2-1000T | User Manual - Page 46
, refer to 3. Installation Wizard. 8.4 Antenna Power When you connect an active antenna to the ANTENNA IN connector on the rear of the receiver. 1. Press MENU button. 2. Select Installation using the OK or button. button, and press the 3. Select Antenna Power from Installation menu using the - Humax F2-1000T | User Manual - Page 47
not so good that the quality of receiving signal strength is not recommendable, perform the software upgrade later. ** Caution: • Please be careful to keep the power on and the power cord plugged in during software update. If the power is off during software update, it may cause fatal damage to the - Humax F2-1000T | User Manual - Page 48
and press the OK button to return to the previous menu. 4. If using Automatic Update You can set the product to find HUMAX software update site and update software automatically. 1. Select Automatic from Software Update Menu screen using the button, and press the OK or button. 2. Automatically - Humax F2-1000T | User Manual - Page 49
, the product is automatically powered off and on again. 5. Manual Update You can perform Manual Update only if you know MUX information of software update correctly. Among the Software Update Sites of HUMAX, the software search operation is performed only for the satellites that have been set - Humax F2-1000T | User Manual - Page 50
button, and press the OK 2. Confirm the information about Hardware version, Software version, Loader version, Update Data and System ID. 10.2 Signal Detection You can view the signal strength and signal quality receiving for the channel that is currently on AV. 1. Select Signal Detection using - Humax F2-1000T | User Manual - Page 51
can manipulate TV using the remote control provided by Humax. Note: This function may not be supported depending on TV model. TV code setting Note: While you are setting TV code, please keep pressing TV button. 1. Point remote control towards the remote control receiving parts of TV. 2. Press the - Humax F2-1000T | User Manual - Page 52
11. Manipulating your TV using Remote Control ** GB 52 - Humax F2-1000T | User Manual - Page 53
** ** GB 53 - Humax F2-1000T | User Manual - Page 54
11. Manipulating your TV using Remote Control ** GB 54 - Humax F2-1000T | User Manual - Page 55
** ** GB 55 - Humax F2-1000T | User Manual - Page 56
11. Manipulating your TV using Remote Control ** GB 56 - Humax F2-1000T | User Manual - Page 57
** ** GB 57 - Humax F2-1000T | User Manual - Page 58
11. Manipulating your TV using Remote Control ** GB 58 - Humax F2-1000T | User Manual - Page 59
12. Menu Map ** GB 59 - Humax F2-1000T | User Manual - Page 60
Shooting Before contacting your local service, please make sure following instructions. If the product does not work normally after completing the following trouble shooting, please contact your local product distributor or service center. 1. No message is displayed on the front panel or product - Humax F2-1000T | User Manual - Page 61
aerial. Check the cable from the aerial.If you cannot resolve the problem you may need to have your aerial and installation tested by a professional . The channel is scrambled. This digital terrestrial receiver does not support the service that enables to descramble the scrambled channels. The - Humax F2-1000T | User Manual - Page 62
14. Specification ** Tuner & Channel Input Connector RF Loop through Output connector Frequency Range Signal Level Demodulation Mode FEC mode Guard Intervals MPEG Transport Stream A/V Decoding Transport Stream Profile Level Input Rate Aspect Ratio Video Resolution Audio Decoding Audio Mode IEC-Type - Humax F2-1000T | User Manual - Page 63
** ** Memory Flash Memory Graphics (MPEG) & System Memory EEPROM RF-Modulator RF/Loop-through Output Connector Frequency Output Channel TV standard Preset Channel A/V & Data In/Out TV SCART Power Supply Input Voltage Type Power Consumption AC Power Adaptor Protection Physical Specification Size - Humax F2-1000T | User Manual - Page 64
receiver about all available services in the network ** OSD (On Screen Display) The function that displays the information about the monitor that the user that software downloads where the manufacturer reserves the right to decide when and where to release them through aerial. ** SCART A 21-pin - Humax F2-1000T | User Manual - Page 65
16. Service and Support ** You can get information such as a troubleshooting guide, software upgrades and product support guide from the following web sites and call center (Hotline). Please try to contact to your local dealers first when you have any problem. Web site and e-mail Homepage http:// - Humax F2-1000T | User Manual - Page 66
16. Service and Support ** Call Center Humax Middle East Call Center (Dubai, UAE) Tel: +971 (0)4 359 2323 (Open: 9:00 - 20:00 / close on Friday) E-mail: [email protected] Open: Local Time in Dubai (GMT+4) 9:00 - 20:00 (Saturday - Thursday, close on Friday) Support Language: English/