Hunter 20775 Owner's Manual

Hunter 20775 Manual

Get Hunter 20775 PDF manuals and user guides View all Hunter 20775 manuals
Add to My Manuals
Save this manual to your list of manuals

Hunter 20775 manual content summary:

  • Hunter 20775 | Owner's Manual - Page 1
    and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Catalog No. Date Purchased Where Purchased Type 2 Models Owner's Guide and Installation Manual English Español Form# 42508-01 20080923 ©2008 Hunter Fan Co.
  • Hunter 20775 | Owner's Manual - Page 2
    Cleaning Your Ceiling Fan 14 9 • Troubleshooting 15 Welcome Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We
  • Hunter 20775 | Owner's Manual - Page 3
    , follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Ceiling Outlet Box For ceilings higher than 8 feet, you can purchase Hunter extension downrods. All Hunter fans use sturdy 3/4" diameter
  • Hunter 20775 | Owner's Manual - Page 4
    missing or damaged, contact your Hunter dealer or call Hunter Technical Support Department at 888-830-1326. Preparing the Fan Site Before you begin installing the fan, follow all the instructions in the pullout sheet called "Preparing the Fan Site." Proper ceiling fan location and attachment to the
  • Hunter 20775 | Owner's Manual - Page 5
    a tag, to the service panel. Isolator Ceiling Plate 2-1. Drill two pilot holes into the wood support structure. The pilot holes Ceilings: Be sure to orient the ceiling plate so that the arrows printed on the ceiling plate are pointing toward the ceiling peak. 5 42508-01 • 09/23/08 • Hunter Fan
  • Hunter 20775 | Owner's Manual - Page 6
    instructions. Steps 3-1 - 3-2 You can assemble your fan for standard or angled mounting as shown in steps 3-1 - 3-4. For low profile mounting (ceilings Raise the fan and place the hook on the downrod through the loop on the ceiling plate. The arrows on the downrod and on the ceiling plate should
  • Hunter 20775 | Owner's Manual - Page 7
    fall if not assembled as directed in these installation instructions. Step 3-6 You can assemble your fan for standard or angled mounting as shown in steps 3-1 - 3-4 on the previous page. For low profile mounting (ceilings less than 8 feet high), see steps 3-5 - 3-11 on this page. For Low Profile
  • Hunter 20775 | Owner's Manual - Page 8
    wire from the fan • The black wire from the ceiling to the black and the black/ white wire from the fan 4-2. Push all wires and wire connectors back through the ceiling plate hole into the outlet box. Wire Connector Dual Switch Wiring Single Switch Wiring 8 42508-01 • 09/23/08 • Hunter Fan Company
  • Hunter 20775 | Owner's Manual - Page 9
    the tab hole in the canopy over the tab on the ceiling plate. 5-2. Raise the canopy. Make sure the holes in the canopy and in the ceiling plate are aligned. 5-3. Partially install the three canopy screws into Canopy Screw Step 5-4 Canopy Canopy Trim Ring 9 42508-01 • 09/23/08 • Hunter Fan Company
  • Hunter 20775 | Owner's Manual - Page 10
    Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both
  • Hunter 20775 | Owner's Manual - Page 11
    Your Installation With or Without a Multi Staked Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture. The steps below
  • Hunter 20775 | Owner's Manual - Page 12
    of lights may vary. Plug Connector Detail Steps 7-6 - 7-7 Housing Assembly Screw Thumbscrews Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts the light kit to a maximum of 190 Watts. Exceeding that limit or the marked limit on this product
  • Hunter 20775 | Owner's Manual - Page 13
    fan. Capacitors 7-12. Locate the reversing switch and carefully remove Fan connector from the end of the fan pull chain. Carefully loosen the bellmouth housing.) 7-17. Insert the pull chain and fan pull chain switch through the Steps 7-17 - Fan Speed Switch 7-21. Continue with Step 7-6. 13 42508-01 •
  • Hunter 20775 | Owner's Manual - Page 14
    chain has two settings: ON and OFF. 8-4. Ceiling fans work best by blowing air downward (counterclockwise blade rotation fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 14 42508-01 • 09/23/08 • Hunter Fan
  • Hunter 20775 | Owner's Manual - Page 15
    blade is cracked. If so, replace all the blades. Problem: Excessive wobbling. 1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
Type 2 Models
Type 2 Models
Type 2 Models
Form# 42508-01
20080923
©2008 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Catalog No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual