Hunter 21100 Owner's Manual - Page 9

3 • Assembling and Hanging the Fan (Low Profile Only) You can assemble your fan for standard or angled mounting as shown in steps 3-1 - 3-3 on the previous page. For low profile mounting (ceilings less than 8 feet high), see steps 3-6 - 3-10 on this page. 3-6. Remove the screws from the hanger ball bracket. 3-7. Place the low profile washer from the parts sack into the canopy. 3-8. Place the canopy trim ring and canopy with washer on top of the fan assembly. 3-9. Align the screw holes in the washer with the holes in the adapter. Assemble securely with three #8-32 x 3/4" screws. 3-10. Raise the fan and place the hook on the hanger bracket through the round hole in the rim of the canopy. WARNING: Fan may fall if not assembled as directed in these installation instructions. Step 3-6 (Not Actual Size) Steps 3-8 - 3-9 Low Profile Washer Step 3-7 (Detail) Low Profile Washer Adapter Canopy Trim Ring #8-32 x 3/4" Screw Step 3-10 9 45055-01 • 02/24/11 • Hunter Fan Company