Hunter 21879 Owner's Manual

Hunter 21879 Manual

Get Hunter 21879 PDF manuals and user guides View all Hunter 21879 manuals
Add to My Manuals
Save this manual to your list of manuals

Hunter 21879 manual content summary:

  • Hunter 21879 | Owner's Manual - Page 1
    and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Catalog No. Date Purchased Where Purchased Type 2 Models Owner's Guide and Installation Manual English Español Form# 42651-01 20080925 ©2008 Hunter Fan Co.
  • Hunter 21879 | Owner's Manual - Page 2
    Cleaning Your Ceiling Fan 13 9 • Troubleshooting 14 Welcome Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We
  • Hunter 21879 | Owner's Manual - Page 3
    close to the ceiling, recommended for ceilings less than 8 feet high CAUTION: To reduce the risk of personal injury, attach the fan directly to the support structure of the building according to these instructions, and use only the hardware supplied. 3 42651-01 • 09/25/08 • Hunter Fan Company
  • Hunter 21879 | Owner's Manual - Page 4
    missing or damaged, contact your Hunter dealer or call Hunter Technical Support Department at 888-830-1326. Preparing the Fan Site Before you begin installing the fan, follow all the instructions in the pullout sheet called "Preparing the Fan Site." Proper ceiling fan location and attachment to the
  • Hunter 21879 | Owner's Manual - Page 5
    the service panel. 2-1. Drill two pilot holes into the wood support structure Ceiling Peak For Angled Ceilings: Be sure to orient the ceiling plate so that the two tabs are pointing toward the ceiling peak. Ceiling Plate 3" Wood Screw Steps 2-3 - 2-6 5 42651-01 • 09/25/08 • Hunter Fan Company
  • Hunter 21879 | Owner's Manual - Page 6
    profile screws. Hanging the Fan: Note: To hang the fan, you must tilt the canopy to an almost vertical position so that the canopy slots sit on the ceiling plate hooks. 3-7. Raise the fan and align the slots in Adapter Low Profile Screw Low Profile Washer 6 42651-01 • 09/25/08 • Hunter Fan Company
  • Hunter 21879 | Owner's Manual - Page 7
    them carefully back through the ceiling plate into the outlet box. 4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 7 42651-01 • 09/25/08 • Hunter Fan Company fsdfsdf Wire Connector Dual Switch Wiring
  • Hunter 21879 | Owner's Manual - Page 8
    up with the screw holes aligned, partially install two canopy screws into the holes opposite the ceiling plate tabs. 5-4. Partially install a canopy screw between the slots in the canopy. When all 5-2 Step 5-3 Canopy Canopy Trim Ring Canopy Screw 8 42651-01 • 09/25/08 • Hunter Fan Company
  • Hunter 21879 | Owner's Manual - Page 9
    Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both
  • Hunter 21879 | Owner's Manual - Page 10
    Installation With a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly. WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch - 7-3 Housing Assembly Screw Upper Switch Housing 10 42651-01 • 09/25/08 • Hunter Fan Company
  • Hunter 21879 | Owner's Manual - Page 11
    the upper switch housing with three housing assembly screws. Steps 7-6 - 7-7 Lower Switch Housing Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts the light kit to a maximum of 190 Watts. Exceeding that limit or the marked limit on this
  • Hunter 21879 | Owner's Manual - Page 12
    bulbs (60 Watt Maximum) into the sockets. 7-8. Attach the extra pull chains (included) to the fan pull chain and light pull chain using the plastic breakaway connector. (You may find the plastic breakaway connector Cover Plate Grommet Hole Finial 12 42651-01 • 09/25/08 • Hunter Fan Company
  • Hunter 21879 | Owner's Manual - Page 13
    reinsert the chain into the connector. 8-3. Ceiling fans work best by blowing air downward (counterclockwise blade fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 13 42651-01 • 09/25/08 • Hunter Fan Company
  • Hunter 21879 | Owner's Manual - Page 14
    blade is cracked. If so, replace all the blades. Problem: Excessive wobbling. 1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
Type 2 Models
Type 2 Models
Type 2 Models
Form# 42651-01
20080925
©2008 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Catalog No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual