Hunter 21879 Owner's Manual - Page 12

7 • Completing Your Installation With a Bowl Light Fixture (Continued) Installing the Glass Bowl 7-7. First install B10 candelabra bulbs (60 Watt Maximum) into the sockets. 7-8. Attach the extra pull chains (included) to the fan pull chain and light pull chain using the plastic breakaway connector. (You may find the plastic breakaway connector on the end of the extra chain.) 7-9. Thread the pull chains through the holes in the metal disc. Then, thread the pull chains through the hole in the center of the glass bowl. 7-10. Thread the pull chains through the grommet holes on the sides of the cover plate. 7-11. Place the cover plate up against the glass bowl. Align the holes in the cover plate and glass bowl. 7-12. Screw the finial onto the threaded rod end until tight. Light Bulbs (B10 Candelabra Base 60 Watt Maximum) Metal Disc Threaded Rod Glass Bowl Breakaway Connector Cover Plate Grommet Hole Finial 12 42651-01 • 09/25/08 • Hunter Fan Company