Hunter 23958 Owner's Manual - Page 15
Uninstalling the Light Fixture
View all Hunter 23958 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued) Uninstalling the Light Fixture 7-13. To uninstall the light fixture, first disconnect the plug connectors between the black wire and the black wire with a white stripe. 7-14. Disconnect the plug connectors between the two white wires. 7-15. Uninstall the connector and washer from the end of the light fixture inside the lower switch housing. 7-16. Unscrew the threaded rod of the light fixture from the lower switch housing. 7-17. Remove the light fixture from the lower switch housing pulling disconnected wires through the hole in the center of the lower switch housing. Threaded Rod Note: When removing the wires, pull the thin plug connector (male) through first, and then pull the other plug connector (female) through the hole. 7-18. Install the dummy terminals (included in the sack parts) on the two disconnected wires in the lower switch housing. 7-19. Install the switch housing cap and plug button to the lower switch housing. 7-20. Once you have uninstalled the light fixture, continue Steps 7-16 - 7-18 with Step 7‑6. Lower Switch Housing Male Dummy Terminal Female Dummy Terminal Cap Plug Button Step 7-19 15 42884-01 • 11/05/09 • Hunter Fan Company