Hunter 23980 Owner's Manual - Page 9
rubber bumpers from the motor. Save the screws and discard
View all Hunter 23980 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. 6-2. Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the blades may appear slightly loose after screws are tightened. is is normal. 6-3. Some blade mounting screws are installed in the motor to secure shipping blocks. Remove the blade mounting screws and rubber bumpers from the motor. Save the screws and discard the bumpers. 6-4. For each blade, insert one blade mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both mounting screws. Use with grommet Blade Assembly Steps 6-1 - 6-2 Screws 6 • Assembling the Blades Step 6-1 (Detail) Grommet 9 Use without grommet Blade Mounting Screw 42405-01 • 01/20/06 Step 6-4 Hunter Fan Company