Hunter 28872 Owner's Manual
Hunter 28872 Manual
 |
View all Hunter 28872 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hunter 28872 manual content summary:
- Hunter 28872 | Owner's Manual - Page 1
Owner's Guide and Installation Manual English Español For Your Records and Warranty Assistance Model Name Catalog/Model No Serial No Date Purchased Where Purchased For reference also attach your receipt or a copy of your receipt to the manual. Form# 42656-01 20090814 ©2009 Hunter Fan Co - Hunter 28872 | Owner's Manual - Page 2
Cleaning Your Ceiling Fan 12 9 • Troubleshooting 13 Welcome Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We - Hunter 28872 | Owner's Manual - Page 3
, follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Ceiling Outlet Box For ceilings higher than 8 feet, you can purchase Hunter extension downrods. All Hunter fans use sturdy 3/4" diameter - Hunter 28872 | Owner's Manual - Page 4
, contact your Hunter dealer or call Hunter Technical Support Department at 888-830-1326 (In Canada, call 1-866-268-1936). Preparing the Fan Site Before you begin installing the fan, follow all the instructions in the pullout sheet called "Preparing the Fan Site." Proper ceiling fan location and - Hunter 28872 | Owner's Manual - Page 5
the service panel. 2-1. Drill two pilot holes into the wood support structure through Ceiling Peak For Angled Ceilings: Be sure to orient the ceiling plate so that the two tabs are pointing toward the ceiling peak. Ceiling Plate 3" Wood Screw Steps 2-3 - 2-6 5 42656-01 • 08/14/09 • Hunter Fan - Hunter 28872 | Owner's Manual - Page 6
Fan may fall if not assembled as directed in these installation instructions. 3-1. Unbundle the wires from the fan . For Standard or Angled mounting: 3-2. Insert the downrod through the canopy and canopy trim ring. Feed the wires from the fan the Fan. - Hunter 28872 | Owner's Manual - Page 7
with national and local electrical codes. 4-2. Make sure the fan • The black wire from the ceiling to the black wire from the fan • The black/white wire from the fan to the wire for the wall switch 4-3. Push all wires and wire connectors into the outlet box. 7 42656-01 • 08/14/09 • Hunter Fan - Hunter 28872 | Owner's Manual - Page 8
hanger ball groove. Note: Your fan may have multiple tabs and grooves that must be aligned. 5-2. Swing the fan up to align the canopy screw holes with the mounting holes on the ceiling plate. WARNING: The slots in the canopy trim ring. Canopy Screw 8 42656-01 • 08/14/09 • Hunter Fan Company - Hunter 28872 | Owner's Manual - Page 9
6 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Install the grommets iron mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade iron mounting screw, then securely tighten both screws - Hunter 28872 | Owner's Manual - Page 10
(40 Watt maximum each). Light Kit Steps 7-2 - 7-4 Housing Assembly Screw Step 7-5 Candelabra Bulb Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts the light kit to a maximum of 190 Watts. Exceeding that limit or the marked limit on this - Hunter 28872 | Owner's Manual - Page 11
) 7-6. Remove the breakaway connectors from the light and fan pull chains and thread them both through the hole in the glass bowl. Align the holes in the cover plate and glass bowl. 7-8. read the fan pull chain and light pull chain through the appropriate holes. 7-9. Screw the finial onto the - Hunter 28872 | Owner's Manual - Page 12
chain into the connector. 8-3. Ceiling fans work best by blowing air fan draw air upward (clockwise blade rotation) will distribute the warmer air trapped at the ceiling fan finish. To Change Airflow Direction Turn the fan off and let it come to a complete stop. Slide the reversing switch on the fan - Hunter 28872 | Owner's Manual - Page 13
plate and in the upper and lower switch housing. Problem: Excessive wobbling. 1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
 |
 |
Type 2 Models
Type 2 Models
Type 2 Models
Form# 42656-01
20090814
©2009 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual