Hunter 28872 Owner's Manual - Page 10

7 • Installing the Light Fixture Housing Assembly Screw Housing Step 7-1 Housing Assembly Screw 7-1. Partially install two housing assembly screws into the housing. 7-2. To attach the light fixture, connect the upper plug connector from the motor to the lower plug connector in the light fixture assembly. Note: Both plug connectors are polarized and will only fit together one way. Make sure the connectors are properly aligned before connecting them. Incorrect connection could cause improper operation and damage to the product. 7-3. Place the keyholes in the light fixture assembly over the partially installed screws in the housing. 7-4. Rotate the light fixture clockwise until the screws are firmly situated in the narrow end of the keyholes. Install the remaining screw. Tighten all three screws securely. 7-5. Install three candelabra bulbs (40 Watt maximum each). Light Kit Steps 7-2 - 7-4 Housing Assembly Screw Step 7-5 Candelabra Bulb Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts the light kit to a maximum of 190 Watts. Exceeding that limit or the marked limit on this product may result in fire hazard or improper operation. 10 42656-01 • 08/14/09 • Hunter Fan Company