Husqvarna 128LDx Owners Manual

Husqvarna 128LDx Manual

Get Husqvarna 128LDx PDF manuals and user guides View all Husqvarna 128LDx manuals
Add to My Manuals
Save this manual to your list of manuals

Husqvarna 128LDx manual content summary:

  • Husqvarna 128LDx | Owners Manual - Page 1
    EN (2-24) FR (25-47) ES (48-70)
  • Husqvarna 128LDx | Owners Manual - Page 2
    . In order to prevent unintentional starting, the spark plug cap must be removed from the spark plug when assembling, checking and/or performing maintenance. Only use non--metallic, flexible cutting attachments, i.e. trimmer heads with trimmer line. This product is in accordance with applicable
  • Husqvarna 128LDx | Owners Manual - Page 3
    Fitting the trimmer guard and trimmer head 10 FUEL HANDLING Fuel safety 11 Fuel 11 Fuelling 12 STARTING AND STOPPING Check before starting 13 Starting and stopping 13 WORKING TECHNIQUES General working instructions 15 MAINTENANCE Carburetor 17 Muffler 17 Spark plug 18 Two--piece shaft 18
  • Husqvarna 128LDx | Owners Manual - Page 4
    16 14 15 18 13 Know your trimmer 1. Trimmer head 2. Grease filler cap 3. Bevel gear 4. Cutting attachment guard 5. Upper shaft 6. Lower shaft 7. Loop handle 8. Throttle control 9. Stop switch 10.Throttle lock--out 11. Cylinder cover 12. Starter handle 13. Fuel tank 14. Choke control 15. Primer
  • Husqvarna 128LDx | Owners Manual - Page 5
    , maintenance and service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the heading Maintenance. All covers and guards must be fitted before starting. Make sure the spark plug cap and lead
  • Husqvarna 128LDx | Owners Manual - Page 6
    . If the retailer who sells your machine is not a servicing dealer, ask him for the address of your nearest service agent. WARNING: Never use a machine that has faulty safety equipment! Follow the control, maintenance and service instructions described in this section. If your machine fails any of
  • Husqvarna 128LDx | Owners Manual - Page 7
    . The risk increases at low temperatures. For mufflers, it is very important that you follow the instructions on checking, maintaining, and servicing your machine. Never use a machine that has a faulty muffler. Regularly check that the muffler is securely attached to the machine. WARNING: Mufflers
  • Husqvarna 128LDx | Owners Manual - Page 8
    that is poorly ventilated. The exhaust fumes from the engine are hot and may contain sparks which can start a fire. Never start the machine attachment has stopped completely and disconnect the lead from the spark plug before you start to work on it. Trimmer head IMPORTANT! Always ensure the trimmer
  • Husqvarna 128LDx | Owners Manual - Page 9
    the shaft. S Push the attachment into the coupling until the attachment snaps into place. S Before using the unit, tighten the knob securely. ENGINE S attachment (A) with the arrow on the coupling (B). B A S Push and hold the button (C). While securely holding the engine end, pull the attachment
  • Husqvarna 128LDx | Owners Manual - Page 10
    one of the holes in the drive disc aligns with the corresponding hole in the gear housing. S Insert hex wrench (G) in the hole to lock the shaft. S Screw on the trimmer head (H) in the op- posite direction to the direction of rotation. H S To dismantle, follow the instructions in the reverse order
  • Husqvarna 128LDx | Owners Manual - Page 11
    for our two--stroke engines. Mixture 1:50 (2%). S If HUSQVARNA two--stroke oil is not available, you may use another two-stroke oil of good quality that is intended for air cooled engines. Contact your dealer when selecting an oil. Mixing ratio 1:33 (3%). S Never use two--stroke oil intended for
  • Husqvarna 128LDx | Owners Manual - Page 12
    fuel. Always shut off the engine before refueling. Always stop the engine and let it cool for a few minutes before refuelling. When refueling, open the fuel the area around the fuel cap. Contamination in the tank can cause operating problems. S Ensure that the fuel is well mixed by shaking the
  • Husqvarna 128LDx | Owners Manual - Page 13
    distance is 15 meters. Cold engine Primer bulb: Press the primer bulb 10 times until fuel begins to fill the bulb. The primer bulb need not be completely filled. S Check that the trimmer head and trimmer guard are not damaged or cracked. Replace the trimmer head or trimmer guard if they have been
  • Husqvarna 128LDx | Owners Manual - Page 14
    engine choke lever to the opened position. CAUTION! Do not put any part of your body in marked area. Contact can result in burns to the skin, or electrical shock if the spark plug cap has been damaged. Always use gloves. Do not use a machine with damaged spark plug cap. 115299326 Rev. 2 7/15/10
  • Husqvarna 128LDx | Owners Manual - Page 15
    get caught between the guard and cutting attachment. Always stop the engine before cleaning. Grass trimming with a trimmer head Trimming S Hold the trimmer head just above the ground at an angle. It is the end of the trimmer line that does the work. Let the trimmer line work at its own pace. Never
  • Husqvarna 128LDx | Owners Manual - Page 16
    else may attempt to remove the cut material while the engine is running or the trimmer line is rotating, as this can result in serious injury. Stop the engine and trimmer head before you remove material that has wound around the drive shaft as otherwise there is a risk of injury. The bevel gear
  • Husqvarna 128LDx | Owners Manual - Page 17
    your servicing dealer to adjust your carburetor. WARNING: The complete clutch, clutch cover, and shaft must be fitted before the machine is started, otherwise parts could come loose and cause personal injury. Function S The carburetor governs the engine's speed via the throttle control. Air and fuel
  • Husqvarna 128LDx | Owners Manual - Page 18
    drive shaft ends (splined coupling) will seize if they are not lubricated regularly. Air filter The air filter must be regularly cleaned to remove dust and dirt in order to avoid: S Carburetor malfunctions S Starting problems S Loss of engine power S Unnecessary wear to engine parts S Excessive fuel
  • Husqvarna 128LDx | Owners Manual - Page 19
    of grease at the factory. However, before using the machine you should check that the bevel gear is filled three--quarters full with grease. Use HUSQVARNA special grease. The grease in the bevel gear does not normally need to be changed except if repairs are carried out. 115299326 Rev. 2 7/15
  • Husqvarna 128LDx | Owners Manual - Page 20
    undamaged and not cracked. Replace the trimmer head if necessary. X Check that nuts and screws are tight. X Check that there are no fuel leaks from the engine, tank or fuel lines. X Check the starter and starter cord. Clean the outside of the spark plug. Remove it and check the electrode
  • Husqvarna 128LDx | Owners Manual - Page 21
    bore, mm Stroke, mm Idle speed, rpm Recommended max. fast idle speed, rpm Speed of output shaft, rpm Max. engine output, acc. to ISO 8893, kW Catalytic converter muffler Speed--regulated ignition system 128LDX 28 35 28,7 2800--3200 11000 8000 0,8 Yes Yes Ignition system Spark plug Electrode gap
  • Husqvarna 128LDx | Owners Manual - Page 22
    number 531 00 77--15) Attachments Grass blade/grass cutter kit Cultivator attachment with shaft Edger attachment with shaft Blower attachment with shaft Pruner attachment with shaft Clean sweep attachment with shaft Hedge trimmer attachment with shaft Trimmer attachment Part. no. 952 715 616 952
  • Husqvarna 128LDx | Owners Manual - Page 23
    Trimmer Head Line Loading Instructions 1 2 3 4 5 6m 20i 3m 10i 6 7 8 9 115299326 Rev. 2 7/15/10 English--- 23
  • Husqvarna 128LDx | Owners Manual - Page 24
    Plastic Blades (Tri Cut) 1 2 3 4 5 6 7 8 115299326 Rev. 2 7/15/10 English--- 24
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
EN (2-24)
FR (25-47)
ES (48-70)