Husqvarna 128LDx Owners Manual - Page 9
Assembly - engine only
View all Husqvarna 128LDx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
ASSEMBLY NOTE: Make sure unit is assembled correctly as shown in this manual. Fitting the loop handle S Clip the loop handle onto the shaft. Note that the loop handle must be fitted between the arrows on the shaft. S Push the attachment into the coupling until the attachment snaps into place. S Before using the unit, tighten the knob securely. ENGINE S Slide the spacer into the slot in the loop handle. S Fit the nut, knob and screw. S Make a final adjustment of the loop handle to a comfortable working position. Tighten the knob (do not overtighten). Assembling and dismantling the two--piece shaft Dismantling: S Loosen the coupling by turning the knob (at least three times). Assembly: S Loosen the coupling by turning the knob. S Align the tab of the attachment (A) with the arrow on the coupling (B). B A S Push and hold the button (C). While securely holding the engine end, pull the attachment straight out of the coupling. C 115299326 Rev. 2 7/15/10 English--- 9