Husqvarna 324LDx Owners Manual

Husqvarna 324LDx Manual

Get Husqvarna 324LDx PDF manuals and user guides View all Husqvarna 324LDx manuals
Add to My Manuals
Save this manual to your list of manuals

Husqvarna 324LDx manual content summary:

  • Husqvarna 324LDx | Owners Manual - Page 1
    Operator's manual 324LX-series 324LDX-series Please read the operator's manual carefully and make sure you understand the instructions before using the machine. English
  • Husqvarna 324LDx | Owners Manual - Page 2
    saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. Please read the operator's manual carefully and make sure you understand the instructions engine attachments, i.e. trimmer heads with trimmer cord. 2 - English
  • Husqvarna 324LDx | Owners Manual - Page 3
    and dismantling the two-piece shaft ......... 12 Fitting the trimmer head 13 Fitting other guards and cutting attachments 13 FUEL HANDLING Fuel 14 STARTING AND STOPPING Check before starting 15 Starting and stopping 15 MAINTENANCE Carburetor 17 Muffler 17 Cooling system 17 Spark plug 18
  • Husqvarna 324LDx | Owners Manual - Page 4
    SAFETY INSTRUCTIONS Personal as the engine stops. GLOVES Gloves should be worn when necessary, e.g., when fitting cutting attachments. HEARING and if service and/or repairs are not carried out professionally. If you need further information please contact your nearest servicing dealer. WARNING
  • Husqvarna 324LDx | Owners Manual - Page 5
    fumes from the engine are hot and may contain sparks which can start a fire. Never start the machine indoors or near combustible material! Cutting equipment A trimmer head is intended for trimming grass. Locking nut A locking nut is used to secure some types of cutting attachment. In countries that
  • Husqvarna 324LDx | Owners Manual - Page 6
    of your nearest service agent. Throttle lock • Make sure the throttle control is locked at the idle setting when the throttle lock is released. Stop switch • Start the engine and make sure the engine stops when you move the stop switch to the stop setting. Cutting attachment guard • Ensure that
  • Husqvarna 324LDx | Owners Manual - Page 7
    your service agent to get it repaired. instructions for the cutting attachment to check the correct way to load the cord and the correct cord diameter. Trimmer head • Only use the recommended trimmer heads and trimmer cords. These have been tested by the manufacturer to suit a particular engine
  • Husqvarna 324LDx | Owners Manual - Page 8
    operate with this engine unit are the cutting attachments we recommend service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions , change your clothes. Wash any part of your body that has come in
  • Husqvarna 324LDx | Owners Manual - Page 9
    instructions IMPORTANT! This section describes the basic safety precautions for working with clearing saws and trimmers attachment. Always stop the engine before cleaning. Grass trimming using a trimmer head and plastic blades Trimming • Hold the trimmer remove grass and weeds up against walls,
  • Husqvarna 324LDx | Owners Manual - Page 10
    INSTRUCTIONS • The trimmer is ideal for cutting grass that is difficult to reach using a normal lawn mower. Keep the cord parallel to the ground when cutting. Avoid pressing the trimmer head against the ground as this can ruin the lawn and damage the tool. • Do not allow the trimmer attachment
  • Husqvarna 324LDx | Owners Manual - Page 11
    WHAT IS WHAT? LDX What is what? 1 Trimmer head 2 Bevel gear 3 Grease filler cap, bevel gear 4 Cutting attachment guard 5 Shaft 6 Loop handle 7 Stop switch 8 Throttle control 9 Throttle lock 10 Cylinder cover 11 Starter handle 12 Air purge 13 Fuel tank 14 Choke control
  • Husqvarna 324LDx | Owners Manual - Page 12
    loop handle. • Fit the nut, knob and screw. Do not overtighten. • Now adjust the trimmer to give a comfortable working position. Tighten the bolt/knob. Assembling and dismantling the two-piece shaft (324LDx) Assembly: • Make sure the knob is loose. • Push the knob towards the coupling. • Carefully
  • Husqvarna 324LDx | Owners Manual - Page 13
    the catches on the cover. • To dismantle, follow the instructions in the reverse order. Fitting other guards and cutting attachments G K F • Fit the correct trimmer guard (A) for use with the trimmer I B J C head. I Hook the trimmer guard/combination guard onto the fitting on the shaft
  • Husqvarna 324LDx | Owners Manual - Page 14
    low oil level can cause serious damage to the engine. When the machine is new the engine oil should be changed after the first month or after 10 hours of operation. • For the best result and function use HUSQVARNA engin oil. • When HUSQVARNA engine oil is not available another high grade engine oil
  • Husqvarna 324LDx | Owners Manual - Page 15
    trimmer head and trimmer guard are not damaged or cracked. Replace the trimmer head or trimmer guard if they have been exposed to impact or are cracked. OIL Warm engine Place the machine on a flat surface. Ensure the cutting attachment cannot come into contact with any object. Make sure no
  • Husqvarna 324LDx | Owners Manual - Page 16
    STARTING AND STOPPING Starting WARNING! When the engine is started with ! the choke in either the choke or start throttle positions the cutting attachment will start to rotate immediately. Hold the body of the machine on the ground using your left hand (CAUTION! Not with your foot!). Grip the
  • Husqvarna 324LDx | Owners Manual - Page 17
    carburetor governs the engine's speed via the throttle control. Air and fuel are mixed in the carburetor. • Setting the carburettor involves adapting the engine cutting attachment stops, contact your dealer/service workshop. Do not use the machine until it has been correctly adjusted or repaired.
  • Husqvarna 324LDx | Owners Manual - Page 18
    : • Carburettor malfunctions • Starting problems • Loss of engine power • Unnecessary wear to engine parts • Excessive fuel consumption. Clean the oil. See instructions under the heading Oiling the air filter. Oiling the air filter Always use HUSQVARNA filter oil, art. no. 531 00 92-48. The filter oil
  • Husqvarna 324LDx | Owners Manual - Page 19
    except if repairs are carried out. CAUTION! Use only HUSQVARNA replacement parts. Use of other brands of replacement parts can attachments not specifically recommended by HUSQVARNA. Maintenance schedule Below you will find some general maintenance instructions. Daily maintenance • Check the engine oil
  • Husqvarna 324LDx | Owners Manual - Page 20
    NGK CMR5H Electrode gap, inch/mm 0,024/0,6 Fuel and lubrication system Manufacturer/type of carburetor Walbro Fuel tank capacity, US pint/litre 1,06/0,5 Weight Weight without fuel, cutting attachment and guard, Lbs/kg 11,2/5,1 Sound levels (see note 1) Equivalent sound pressure level at
  • Husqvarna 324LDx | Owners Manual - Page 21
    DATA 324Lx, 324LDx Approved accessories Arbor shaft thread M10 Plastic blades Trimmer head Type Tricut Ø 255 mm Tricut Ø 300 mm Trimmy Fix Superauto II 1" S35 T25 T35 Attachments Clean sweep attachment with shaft SR600 Hedge trimmer attachment with shaft HA 110 Hedge trimmer attachment with
  • Husqvarna 324LDx | Owners Manual - Page 22
    or improper maintenance of your unit. Your emission control system includes Parts such as the carburetor and the ignition system. Where a warrantable condition exists, Husqvarna Forest & Garden will repair your small nonroad engine at no cost to you. Expenses covered under warranty include diagnosis
  • Husqvarna 324LDx | Owners Manual - Page 23
    Super Auto II Super Auto II 1" 1 2 3 4 5 2,4 mm .095" 4,0 m 13' 6 ~2,0 m 6,5 ' 15 cm 6" 7 15 cm 6" 8 9 10
  • Husqvarna 324LDx | Owners Manual - Page 24
  • Husqvarna 324LDx | Owners Manual - Page 25
    2,4-2,7 mm .095-.106" S35 1 4 2 5 3 8,5 m 28' 10 cm 4" 4,2 m 14' 6 7 8 "Clic" 10 11 15 cm 6"
  • Husqvarna 324LDx | Owners Manual - Page 26
    S35 1 3 2 2,4-2,7 mm .095-.106" 4,25 m 14' 4 4,25 m 14' 5 A B ´´®®zz++HH??[[¶¶55Æƨ¨ 15 cm 6" 15 cm 6"
  • Husqvarna 324LDx | Owners Manual - Page 27
    2,4-2,7 mm .095-.106" T35 1 4 2 5 3 8,5 m 28' 10 cm 4" 4,3 m 14' 6 7 15 cm 6" 9 8 "Clic"
  • Husqvarna 324LDx | Owners Manual - Page 28
    1140315-95 ´´®®zz++HH??[[¶¶55Æƨ¨ 2004-09-09
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
English
324L
X-series
324LD
X-series
Operator’s manual
Please read the operator’s manual carefully and make sure you
understand the instructions before using the machine.