Husqvarna 324LDx Owners Manual - Page 12
Assembly - parts
View all Husqvarna 324LDx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
ASSEMBLY Fitting the loop handle • Clip the loop handle onto the shaft. Note that the loop handle must be fitted between the arrows on the shaft. Dismantling: • Undo the knob (at least three turns). • Slide the spacer into the slot in the loop handle. • Fit the nut, knob and screw. Do not overtighten. • Now adjust the trimmer to give a comfortable working position. Tighten the bolt/knob. Assembling and dismantling the two-piece shaft (324LDx) Assembly: • Make sure the knob is loose. • Push the knob towards the coupling. • Carefully twist the lower half of the shaft to unlock it. • Hold both parts of the shaft and pull the lower part of the shaft out of the coupling. • Align the cut-out in the lower part of the shaft with the coupling locking tab on the upper part of the shaft. Then lock the sections together. • Tighten the knob. 12 - English