Husqvarna 350BT Owners Manual

Husqvarna 350BT Manual

Husqvarna 350BT manual content summary:

  • Husqvarna 350BT | Owners Manual - Page 1
    to cause cancer, birth defects or other reproductive WARNING Before using our products, please read this manual carefully to understand the proper use of your unit. APPLICABLE SERIAL NUMBERS: 80100101 and up Operator's manual / 2009-02 330BT 350BT/BF 370BTS/BFS 380BTS/BFS English 115 14 24-95
  • Husqvarna 350BT | Owners Manual - Page 2
    part is under warranty. EMISSION CONTROL WARRANTY PARTS LIST 1 Carburetor and internal parts 2 Intake pipe, airfilter holder and carburetor bolts. 3 Airfilter and fuelfilter covered up to maintenance schedule. 4 Ignition System 1Spark Plug, covered up to maintenance schedule 2Ignition Module 5 Fuel
  • Husqvarna 350BT | Owners Manual - Page 3
    BELT [350BT/BF] [370BTS/BFS] [380BTS/BFS 15 Fuel 16 FUEL 16 HOW TO MIX FUEL 16 FUELING THE UNIT 16 Operation 17 CONTROL ARM [350BF/370BFS/380BFS] . . . . 17 STARTING ENGINE 17 ADJUSTING IDLE SPEED 18 STOPPING ENGINE 18 Maintenance 19 AIR CLEANER 19 FUEL FILTER 20 SPARK PLUG 20 MUFFLER
  • Husqvarna 350BT | Owners Manual - Page 4
    manual carefully and make sure you understand the instructions before using the machine. The blower operator must make sure that no bystanders or animals come nearer than 50 Wear study, non-slip boots The blower can forcibly throw objects that can bounce back. This can result in serious eye
  • Husqvarna 350BT | Owners Manual - Page 5
    or accessories can result in serious personal injury or the death of the operator or others. 9. A blower is a dangerous tool if used carelessly or incorrectly and can cause serious, even fatal injuries. It is extremely important that you read and understand the contents of this Operator's manual. 10
  • Husqvarna 350BT | Owners Manual - Page 6
    . 3. Operate power blowers at the lowest possible throttle speed to do the job. 4. Check your equipment before operation, especially the muffler, air intakes and air filters. WORKING PLAN • To reduce the risk of health damages, avoid excessive use and take sufficient time to rest . FUEL WARNING To
  • Husqvarna 350BT | Owners Manual - Page 7
    , slightly dampen surfaces or use a mister attachment when water is available. c) Conserve water by using power blowers instead of hoses for many lawn and garden applications, including areas such as gutters, screens, patios, grills, porches and gardens. 4. The blower must not be used while on
  • Husqvarna 350BT | Owners Manual - Page 8
    the event that any part must be replaced or any maintenance or repair work not described in this manual must be performed, please contact the nearest Husqvarna servicing dealer for assistance. 7. Do not use any accessory or attachment other than those bearing the Husqvarna mark and recommended for
  • Husqvarna 350BT | Owners Manual - Page 9
    Absorber (Rubber) 19. Band (Stopper) 20. Flexible Hose 21. Pipes 22. Pad 23. Flat Nozzle (Option) 24. "EMISSION" Label „ DISPOSAL When disposing your machine, fuel or oil for the machine, be sure to allow your local regulations. Frame: Harness: Throttle lever: Volute case, Volute cover, Engine
  • Husqvarna 350BT | Owners Manual - Page 10
    Setting 14. Engine Cover 15. Handle Bar (Option) (350BT only) 16. Fan 17. Shock Absorber (Rubber) 18. Flexible Hose 19. Pipes 20. Pad 21. Flat Nozzle (Option) 22. "EMISSION" Label 23. Stop Switch (behind) „ DISPOSAL When disposing your machine, fuel or oil for the machine, be sure to allow your
  • Husqvarna 350BT | Owners Manual - Page 11
    . Fan 18. Shock Absorber (Rubber) 19. Flexible Hose 20. Pipes 21. Pad 22. Flat Nozzle (Option) 23. "EMISSION" Label „ DISPOSAL When disposing your machine, fuel or oil for the machine, be sure to allow your local regulations. Frame: Harness: Throttle lever: Volute case, Volute cover, Engine cover
  • Husqvarna 350BT | Owners Manual - Page 12
    . Fan 18. Shock Absorber (Rubber) 19. Flexible Hose 20. Pipes 21. Pad 22. Flat Nozzle (Option) 23. "EMISSION" Label „ DISPOSAL When disposing your machine, fuel or oil for the machine, be sure to allow your local regulations. Frame: Harness: Throttle lever: Volute case, Volute cover, Engine cover
  • Husqvarna 350BT | Owners Manual - Page 13
    cycle gasoline engine Piston Displacement cu. cm (cu. in) 29.5 (1.8) 50.2 (3.1) 64.9 (4.0) 71.9 (4.4) Air Filter Single stage filter Single stage filter (half wet) 2-stage fresh flow filter system Carburetor (Diaphragm) valve type Rotary Ignition System CDI Digital Ignition Spark Plug
  • Husqvarna 350BT | Owners Manual - Page 14
    may be used to ease assembly of flexible hose to blower elbow. „ THROTTLE LEVER [330BT/350BT/370BTS/380BTS] 1. Set up the throttle holder Adjust the position and angle to achieve a comfortable working position, and tighten the throttle lever. (1) Cable (2) Hose „ THROTTLE CABLE [330BT/350BT
  • Husqvarna 350BT | Owners Manual - Page 15
    of blower tube. NOTE If longer tube is required, the second straight pipe can be connected with the first one. F8 If higher air speed is required, the round blow pipe can be replaced by the flat nozzle with the second straight pipe. (1) Flat nozzle (option) „ HARNESS NOTE The harness must
  • Husqvarna 350BT | Owners Manual - Page 16
    of rubber and/or plastic parts and disruption of engine lubrication. 3. OIL FOR 4-CYCLE ENGINE USE - It can cause spark plug fouling, exhaust port blocking, or piston ring sticking. 4. Mixed fuels which have been left unused for a period of one month or more may clog the carburetor and result in the
  • Husqvarna 350BT | Owners Manual - Page 17
    order. (1)First position (2)Second position „ STARTING ENGINE IMPORTANT • Avoid operating the blower with the flexible tube and swivel joint disconnected. That will reduce the cooling air and the engine could be damaged by overheating. 1. Push the primer bulb until fuel flows out in the clear tube
  • Husqvarna 350BT | Owners Manual - Page 18
    2000 rpm [370BTS/BFS] [380BTS/BFS] at the factory. If it is necessary to adjust the idle speed, use the adjustment screw on the top side of the carburetor. (1)Idling Adjustment Screw „ STOPPING ENGINE [330BT/350BT/370BTS/380BTS] • Move the throttle lever to the STOP position. (4)Stop F22 (1) F23
  • Husqvarna 350BT | Owners Manual - Page 19
    any service to the blower. Contact with rotating blower fan or hot muffler may result in a personal injury. „ AIR CLEANER • Check the air cleaner before use. A clogged air filter may increase fuel consumption while cutting down the engine power. • Never operate the blower without an air filter or
  • Husqvarna 350BT | Owners Manual - Page 20
    using a small wire hook. Disconnect the filter assembly from the fuel pipe and unhook the retainer to disassemble it. Clean the components with gasoline. F32 [370, 380BTS/BFS] (1) Screen (3) Holder (2) Element (x 2) (4) Retainer „ SPARK PLUG • The spark plug may gather carbon deposits on its
  • Husqvarna 350BT | Owners Manual - Page 21
    the strap. If it is attached in the wrong way, it leads to serious personal injury. [350BT/BF] [370, 380BTS/BFS] F40 Storage BEFORE STORING THE BLOWER: 1. Drain the fuel tank and push the primer bulb until it becomes empty of fuel. 2. Remove the spark plug and drop a spoonful of 2-cycle oil into
  • Husqvarna 350BT | Owners Manual - Page 22
    22
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22

WARNING
The engine exhaust from this product contains
chemicals known to the State of California to cause
cancer, birth defects or other reproductive
WARNING
Before using our products, please read this manual
carefully to understand the proper use of your unit.
APPLICABLE SERIAL NUMBERS: 80100101 and up
Operator’s manual
/ 2009-02
3
30BT
3
50BT/BF
3
70BT
S
/BF
S
3
80BT
S
/BF
S
English
115
14
24
-95