Husqvarna 350BT Owners Manual - Page 15
BLOWER TUBES, HARNESS, WAIST BELT, 50BT/BF], Flat nozzle option - strap
View all Husqvarna 350BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Assembly BLOWER TUBES 1. Align the protrusion and the groove provided on the tube ends and F7 twist the tube until the connection is locked. NOTE A light lubricant may be used to ease assembly of blower tube. NOTE If longer tube is required, the second straight pipe can be connected with the first one. F8 If higher air speed is required, the round blow pipe can be replaced by the flat nozzle with the second straight pipe. (1) Flat nozzle (option) HARNESS NOTE The harness must always be worn when working with the machine. Failure to do so means you will be unable to maneuver safely and this can result in injury to yourself or others. A correctly adjusted harness and machine significantly facilitates the work. Adjust the harness to give the best working position. F9 Tighten the side straps so that the pressure is evenly distributed across the shoulders. F10 WAIST BELT [350BT/BF][370BTS/BFS][380BTS/BFS] • The waist belt is attached to the rings on the left and right sides of the F11 frame. NOTE 330BT has no waist belt. Place the waist belt around your waist and not too far down on the stomach. Tighten the waist belt strap so that you feel the weight of the blower resting on your hip. • Be sure to always tighten the buckle in front of your body. F12 WARNING • If you are not using a waist belt, be sure to remove it from the unit and store it. • There is a risk that the belt will be caught, toppling the unit. • There is a danger that the belt will be sucked into the fan. F13 English (1) 15