Husqvarna 357 XP Owners Manual - Page 32

MAINTENANCE Checking the brake trigger Place the chain saw on firm ground and start it. Make sure the chain does not touch the ground or any other object. See the instructions under the heading Start and stop. • Press the throttle lockout and make sure it returns to its original position when you release it. • Check that the throttle control and throttle lockout move freely and that the return springs work properly. Grasp the chain saw firmly, wrapping your fingers and thumbs around the handles. Apply full throttle and activate the chain brake by tilting your left wrist forward onto the front hand guard. Do not let go of the front handle. The chain should stop immediately. • Start the chain saw and apply full throttle. Release the throttle control and check that the chain stops and remains stationary. If the chain rotates when the throttle control is in the idle position you should check the carburetor idle adjustment. Chain catcher Check that the chain catcher is not damaged and is firmly attached to the body of the chain saw. Throttle lockout • Make sure the throttle control is locked at the idle setting when the throttle lockout is released. Right hand guard Check that the right hand guard is not damaged and that there are no visible defects, such as cracks. 32 - English