Husqvarna 360BT Operation Manual - Page 12
engine failure. Stop the engine and remove the object.
View all Husqvarna 360BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
SAFETY INSTRUCTIONS • The speed of the air jet is regulated by means of the throttle. Select the speed best suited for respective tasks. You can set the throttle position using the "stop switch" and by doing so not need to hold your finger on the throttle all the time you are using the blower. Full throttle is obtained when the control is held back fully. • Check that the air intake is not blocked, for example, by leaves or rubbish. A clogged air intake reduces the machine's blowing capacity and increases the engine's working temperature, which can result in engine failure. Stop the engine and remove the object. • Be aware of the wind direction. Work with the wind to make your work easier. • Using the blower to move large piles is time consuming and creates unnecessary noise. • Keep a good balance and a firm foothold. • When work is finished the machine should be stored vertically. 12 - English 1158220-49 Rev. 1 2016-04-08